Wakeboarder Forum Index

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   StatisticsStats   FavoritesFavorites   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages  Log inLog in 
BlogsBlogs   

Help diagnosing bad vibradtion-97 VLX

 
Post new topic   Reply to topic    Wakeboarder Forum Index -> Wakeboard Boat General Discussion
View previous topic :: View next topic  
Author Message
the_dude
Outlaw
Outlaw


Joined: 09 Jul 2008
Posts: 201
City: Long Beach

PostPosted: Aug 30, 2008 2:12 pm    Post subject: Help diagnosing bad vibradtion-97 VLX Reply with quote

So we were out wakeboarding this moring and I noticed the vdrive oil light kicked on. Oil was a little low so we idled back to the dock and bought some oil from down the street. Put it in and light went off as soon as we put it in gear.

Idled out of the 5mph zone and planed out and noticed a bad vibration. I tried faster and slower speeds and it would get worse at higher speeds. Stoped the boat to make sure we didn't have anything dragging on the proper or rudder or anything. Planed out again and if anything the vibration was worse.

Got the boat on the trailer (sitting in water) and idled forward and in reverse. Reverse I noticed a tapping sound so I figured the vdrive was shot but when I looked at it I noticed that the prop shaft was moving really out of round. Watching it for a minute I noticed that the vdrive side of the coupling looked normal but the shaft side was definitely out of round. Where the shaft entered the packing it was really moving out of round.

Any tips or tricks to help me diagnose what the problem is? My first thought was a bent shaft somehow? If I could somehow get the parts to me I'd work all night to fix it if I had too.

Thanks
Back to top
View user's profile Send private message
K-dub
Ladies Man
Ladies Man


Joined: 12 Jan 2003
Posts: 14760

PostPosted: Aug 30, 2008 2:31 pm    Post subject: Reply with quote

are the bolts that hold the shaft to the v-drive tight?
Back to top
View user's profile Send private message Visit poster's website
the_dude
Outlaw
Outlaw


Joined: 09 Jul 2008
Posts: 201
City: Long Beach

PostPosted: Aug 30, 2008 3:30 pm    Post subject: Reply with quote

K-dub wrote:
are the bolts that hold the shaft to the v-drive tight?


LoL. Was just coming to post an update as I posted on the Malibu Forum.

That is the exact problem. Now how do I dial in the proper alignment when bolting it back together?
Back to top
View user's profile Send private message
K-dub
Ladies Man
Ladies Man


Joined: 12 Jan 2003
Posts: 14760

PostPosted: Aug 30, 2008 3:41 pm    Post subject: Reply with quote

not much help there, but.....last time it happened to me, I just tightened one bolt a little bit, then moved across to the next (cris-crossing), if you will.....until I had them all so tight that I couldn't get any more movement on the wrench....kinda like you would do on the lug nuts on a tire. Mine was fine after that.
Back to top
View user's profile Send private message Visit poster's website
K-dub
Ladies Man
Ladies Man


Joined: 12 Jan 2003
Posts: 14760

PostPosted: Aug 30, 2008 3:49 pm    Post subject: Reply with quote

just talked to my mechanic....he said just tighten them down and you should be golden. Nothing else necessary
Back to top
View user's profile Send private message Visit poster's website
the_dude
Outlaw
Outlaw


Joined: 09 Jul 2008
Posts: 201
City: Long Beach

PostPosted: Aug 30, 2008 4:33 pm    Post subject: Reply with quote

just finished, I'm off to the ramp...
Back to top
View user's profile Send private message
the_dude
Outlaw
Outlaw


Joined: 09 Jul 2008
Posts: 201
City: Long Beach

PostPosted: Aug 30, 2008 7:42 pm    Post subject: Reply with quote

The boat is fixed!!

Thanks for calling your mechanic. We got a couple more sets in for everyone tonight!

YESSSSS!
Back to top
View user's profile Send private message
JUST-IN-TIME
Soul Rider
Soul Rider


Joined: 24 Dec 2007
Posts: 356
City: ON YOUR BOAT

PostPosted: Sep 01, 2008 2:24 pm    Post subject: Reply with quote

better check that aliment now
and change to nyloc stainless nuts and lube them up with marine grease

not the first malibu i have seen that had done that

_________________
HUMAN BUILT = HUMAN FIXED
CERTIFIED MARINE/PWC TECHNICIAN
www.switchbait.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Wakeboarder Forum Index -> Wakeboard Boat General Discussion All times are GMT - 8 Hours
Page 1 of 1

Add To Favorites

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
             


Copyright © 2012 - Wakeboarding - Wakeboarder.com - All Right Reserved
Powered by phpBB © 2001, 2005 phpBB Group