Wakeboarder Forum Index

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   StatisticsStats   FavoritesFavorites   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages  Log inLog in 
BlogsBlogs   

cracked engine
Goto page 1, 2  Next
 
Post new topic   Reply to topic    Wakeboarder Forum Index -> Wakeboard Boat General Discussion
View previous topic :: View next topic  
Author Message
stunta666
Newbie
Newbie


Joined: 01 Aug 2006
Posts: 31

PostPosted: Oct 30, 2006 5:48 pm    Post subject: cracked engine Reply with quote

has anybody here ever crack their engine from ice build up? i was scheduled for a winterization today and the of course we got hit with a major storm last night. This was the first time we owned a boat so we were not familiar with the winterization process. so we took her in today and found out the engine had cracks where there was still water in the engine. I am just wondering if insurance should cover it and if anybody's ever made this stupid mistake and what was their outcome. it will cost $9500 to replace the parts and labor. thanks for any help fellas.
Back to top
View user's profile Send private message
Wakebrad
Ladies Man
Ladies Man


Joined: 11 Dec 2003
Posts: 12257
City: Dallas

PostPosted: Oct 30, 2006 6:51 pm    Post subject: Reply with quote

What kind of boat was it? $9500 is a lot to replace an engine block. I'd assume the boat is still under warranty. If not I'd get some price quotes elsewhere.
_________________
You have just entered the twilight zone.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
stunta666
Newbie
Newbie


Joined: 01 Aug 2006
Posts: 31

PostPosted: Oct 30, 2006 7:12 pm    Post subject: Reply with quote

Warranty will probably not cover it because it was our fault for not draining it properly but i never thought to ask the service guy. the block itself was about $6700 and the rest was for labor also this is in canadian funds
Back to top
View user's profile Send private message
blaydeman
Outlaw
Outlaw


Joined: 03 Jun 2006
Posts: 119

PostPosted: Oct 31, 2006 2:19 am    Post subject: Reply with quote

what kind of boat do you have?
Back to top
View user's profile Send private message
blaydeman
Outlaw
Outlaw


Joined: 03 Jun 2006
Posts: 119

PostPosted: Oct 31, 2006 2:20 am    Post subject: Reply with quote

wasnt there someone on here who did a diesel swap on his x-star for that much?
Back to top
View user's profile Send private message
snowboardcorey
Soul Rider
Soul Rider


Joined: 29 Jan 2003
Posts: 411
City: minneapolis

PostPosted: Oct 31, 2006 7:51 am    Post subject: Reply with quote

That seems a little steep for a new block, however if you are running a 6.0 or 6.2 liter that may explain the cost. You should be able to have a 350 long block installed for a more reasonable price.

You are definitally not the only person to have a cracked block, I believe we replaced 4-5 this season because people either winterized incorrectly or totally forgot.

Check a couple of your local service centers to see who has the best price and for alternate options. For example, we replaced an LT-1 engine with a standard 350 to save the customer some bucks, certain engines are much more than a standard crate engine.

_________________
www.midwestmastercraft.com
www.waterskis.com
Back to top
View user's profile Send private message Visit poster's website
bmartin
Addict
Addict


Joined: 05 Feb 2003
Posts: 794

PostPosted: Oct 31, 2006 9:48 am    Post subject: Reply with quote

This happened to me on my first boat. It is scary news when you first learn of it, but in the end it may not be that bad. Depending on where, how many, and how severe the cracks are, you can often patch them up. Basically you ground out the cracks and can have some metal compound put into them. Wish I could be more specigic than 'some metal compound' but it was 10 years ago. We had ours patched up for around $500 and the patches lasted many years and outlasted the bearings which finally did the boat in. It was an old I/O to begin with. Of course this is assuming there are no deformations on the cylinder walls and the engine still runs fine, it just leaks on the outside of the block. Good luck.
Back to top
View user's profile Send private message Send e-mail
snowboardcorey
Soul Rider
Soul Rider


Joined: 29 Jan 2003
Posts: 411
City: minneapolis

PostPosted: Oct 31, 2006 10:24 am    Post subject: Reply with quote

I've seen people patch cracks in manifolds, patching the block is only an option if there are no internal cracks. I've heard of people welding the block as well, but the best fix is to replace the whole thing. If you ever want to sell or trade in your boat you could get burned by not replacing it. Unless you plan on being honest about the fact that the block was cracked.
_________________
www.midwestmastercraft.com
www.waterskis.com
Back to top
View user's profile Send private message Visit poster's website
Wakebrad
Ladies Man
Ladies Man


Joined: 11 Dec 2003
Posts: 12257
City: Dallas

PostPosted: Oct 31, 2006 10:50 am    Post subject: Reply with quote

stunta666, I'm sure the warranty won't cover it. But I assume the dealer is quoting this to you. If you were still under warranty the dealer would be required to do it or you would void your warranty. If it's not under warranty or you don't care about voiding the rest of your warranty check out some other shops. A block by itself shouldn't cost $6700 USD (I don't know how that compares to the canadian dollar (considerting conversion rate and supply/demand).
_________________
You have just entered the twilight zone.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
stunta666
Newbie
Newbie


Joined: 01 Aug 2006
Posts: 31

PostPosted: Oct 31, 2006 10:57 am    Post subject: Reply with quote

thanks for all the help guys, I was beyond devastated when they told me the boat was only 2 months old. I seen the cracks and they looked pretty bad so i dont know if they can be fixed. has anyone ever got their insurance to cover it because it was accidental and the fact that we were new to the boat scene?
Back to top
View user's profile Send private message
Wakebrad
Ladies Man
Ladies Man


Joined: 11 Dec 2003
Posts: 12257
City: Dallas

PostPosted: Oct 31, 2006 11:14 am    Post subject: Reply with quote

stunta666, it couldn't hurt to give them a call and try.
_________________
You have just entered the twilight zone.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Geoff Standish
Addict
Addict


Joined: 13 Jan 2003
Posts: 843
City: Calgary

PostPosted: Oct 31, 2006 12:28 pm    Post subject: Reply with quote

stunta666, I would think your insurance should cover that. If you drive your boat into a pole they would cover that. It was an accident and that's what I'd say insurance is for. At the very least like Wakebrad said, give them a call. What kind of boat do you have? Where abouts in Canada are you?
_________________
Riders Inc.
Back to top
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger MSN Messenger
smokedog2
Outlaw
Outlaw


Joined: 02 Dec 2004
Posts: 210
City: Cincinnati

PostPosted: Oct 31, 2006 1:42 pm    Post subject: Reply with quote

ONE day of cold? I call BS unless it was like 10 below. Were those cracks there when you bought it? Was it outside? Steel breaking ice (in an engine) takes some time and some real cold.

Two months old and your deal did not say 100 times YOU MUST winterize before the freeze (which in Canada can be tomorrow).

Yep, you messed up did you just ignore your dealer?

SD2

_________________
If you are going to be stupid, you gotta be tough
Back to top
View user's profile Send private message
stunta666
Newbie
Newbie


Joined: 01 Aug 2006
Posts: 31

PostPosted: Oct 31, 2006 2:44 pm    Post subject: Reply with quote

it got to about -10 to -15. I was pretty shocked when i went to see the cracks, they were huge. One customer of mine has owned boats for over ten years and even he was amazed that it happend that quick. when we picked up the boat we just went over the basics like how to start the boat launching of it, the guages but never into detail about the winterization. we took the boat out for about 15 hours and had no problems so i'm pretty sure they just happend.
Back to top
View user's profile Send private message
smokedog2
Outlaw
Outlaw


Joined: 02 Dec 2004
Posts: 210
City: Cincinnati

PostPosted: Oct 31, 2006 5:37 pm    Post subject: Reply with quote

Cold front of 10 below (F or C - has to be C) coming in, new customer sheduled to winterize the next day. Dealer says dang - you have a problem. Pretty sas.

Not exactly customer focused. Puppy Eyes

_________________
If you are going to be stupid, you gotta be tough
Back to top
View user's profile Send private message
johnsvt
Criminal
Criminal


Joined: 19 Oct 2006
Posts: 56

PostPosted: Oct 31, 2006 8:12 pm    Post subject: Reply with quote

how much hp do you want send me the money i will build you a solid 500-600 hp big or small block. 9700 is a rip I built motors on the side marine motors are not that much different then drag stuff I do. Heck new JE pistons 30 over, find a seasoned block, reuse crank and rods, balance, deck and hone block take old heads off should cost 3,000. If it is an MC or CC add an extra 1,000 just for the name.
Back to top
View user's profile Send private message
Geoff Standish
Addict
Addict


Joined: 13 Jan 2003
Posts: 843
City: Calgary

PostPosted: Nov 01, 2006 9:10 am    Post subject: Reply with quote

Quote:

If it is an MC or CC add an extra 1,000 just for the name.


Nice!

stunta666, I'd still like to know which boat and motor you have. Where abouts in Canada are you?

I can attest that there isn't as much competition on inboard service dealers in Canada as there aren't very many up here and the ones that are around are crazy busy. Prices for service and parts in Canada can be kind of steep at times.

_________________
Riders Inc.
Back to top
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger MSN Messenger
stunta666
Newbie
Newbie


Joined: 01 Aug 2006
Posts: 31

PostPosted: Nov 01, 2006 10:43 am    Post subject: Reply with quote

it's a bayliner 195 with the mercruiser 5.0 220 hp.
Back to top
View user's profile Send private message
stunta666
Newbie
Newbie


Joined: 01 Aug 2006
Posts: 31

PostPosted: Nov 01, 2006 4:54 pm    Post subject: Reply with quote

were in calgary alberta canada. our weather here is worse then a roller coaster, one day you got sun the next it's snow.
Back to top
View user's profile Send private message
smokedog2
Outlaw
Outlaw


Joined: 02 Dec 2004
Posts: 210
City: Cincinnati

PostPosted: Nov 01, 2006 6:11 pm    Post subject: Reply with quote

Now I'm just pissed. Draining an I/O is a 7 second process.

I think your dealer is a piece of work.


SD2

_________________
If you are going to be stupid, you gotta be tough
Back to top
View user's profile Send private message
supra4me
Newbie
Newbie


Joined: 08 Oct 2006
Posts: 8

PostPosted: Nov 01, 2006 6:35 pm    Post subject: Reply with quote

way to much money
i think insurance will cover
Back to top
View user's profile Send private message
Geoff Standish
Addict
Addict


Joined: 13 Jan 2003
Posts: 843
City: Calgary

PostPosted: Nov 02, 2006 8:25 am    Post subject: Reply with quote

stunta666, was your quote through your dealer? You might want to try getting quotes from all the Mercruiser services centers in Calgary. Calgary Power Boat Services has treated me well in the past.

I believe my dealer Mobius Marine is also a Mercruiser service center so I'd have to give them my nod of approval. If you go that route, ask for Jeff (Great guy!) in service.

Good Luck.

_________________
Riders Inc.
Back to top
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger MSN Messenger
Shawn Madison
Old School Freak
Old School Freak


Joined: 12 Jan 2003
Posts: 2853
City: Norris, TN

PostPosted: Nov 02, 2006 11:32 am    Post subject: Reply with quote

All it takes is just a few hours in the right temperature. Especially if there is a significant amount of water left in it.

That price is probably right on in Canadian dollars.

You would not believe how many ballast pumps get cracked by people not winterizing them.

_________________
My opinion is my opinion!
-> Glyde Clothing <-
Back to top
View user's profile Send private message Send e-mail Blog AIM Address Yahoo Messenger
LFADAM
PityDaFool Who Posts This Much
PityDaFool Who Posts This Much


Joined: 25 Aug 2003
Posts: 5283
City: New York City

PostPosted: Nov 02, 2006 4:07 pm    Post subject: Reply with quote

Shawn Madison, can you make a guess of how cold the low has to be to crack a block...what about a ballast pump? Like if the forecast is high:x low:?

what about ballast tanks?

And does anyone know a step by step process of draining the block and ballast pumps yourself in a 2005 VLX w/Monsoon 340 engine? Itd be nice not to have to worry about it and just do it myself when in doubt.
Back to top
View user's profile Send private message Blog
DRAGON88
Ladies Man
Ladies Man


Joined: 12 Jan 2003
Posts: 8213
City: Portland, OR

PostPosted: Nov 02, 2006 5:02 pm    Post subject: Reply with quote

LFADAM wrote:
Shawn Madison, can you make a guess of how cold the low has to be to crack a block...what about a ballast pump? Like if the forecast is high:x low:?

what about ballast tanks?

And does anyone know a step by step process of draining the block and ballast pumps yourself in a 2005 VLX w/Monsoon 340 engine? Itd be nice not to have to worry about it and just do it myself when in doubt.


To just drain the block on the monsoon 340 you need to remove the knock sensors on either side of the engine block. However, you need to drain other things as well, especially the heater core, transmission cooler, shower, etc. Search for winterization on either http://wakesiderides.com or http://themalibucrew.com

IMO if it's not getting extremely cold (Just at freezing, or just below freezing.) then I've had good luck with just sticking a 60w lightbulb under the engine compartment, it should keep the engine warm enough...

_________________
wakeboards
wakeboarding
Back to top
View user's profile Send private message Send e-mail Visit poster's website
abrider
Criminal
Criminal


Joined: 07 Mar 2006
Posts: 98

PostPosted: Nov 03, 2006 2:25 pm    Post subject: Reply with quote

smokedog2 wrote:
Now I'm just pissed. Draining an I/O is a 7 second process.

I think your dealer is a piece of work.


SD2


I don't have much experience working on true inboards. How do inboard merccruiser engines compare wrt draining for winter? Winterizing etc?
Back to top
View user's profile Send private message
trx-1noob
Newbie
Newbie


Joined: 24 Aug 2006
Posts: 13
City: Cardston

PostPosted: Nov 05, 2006 7:48 am    Post subject: Reply with quote

stunta, I'd bet my left nutter that insurance won't cover it. couple years ago we went through the same thing. we are from cardston, 2 hours south of ya and I hear ya bout that weather thing. it was september, and we had a freak storm and minus 20 for about a week. luckily we (first attempt) tried to winterize ourselves, but didnt' do the whole process because we weren't sure of what to do. needless to say we took the boat to a guy in town that does winterizing and he said half the block was still full, but no cracks. came out lucky. but, it never hurts to ask if it will be covered??
Back to top
View user's profile Send private message
Shawn Madison
Old School Freak
Old School Freak


Joined: 12 Jan 2003
Posts: 2853
City: Norris, TN

PostPosted: Nov 05, 2006 3:12 pm    Post subject: Reply with quote

DRAGON88, Forgot about the heatercore. I had to replace one of those just this past year.

Use environmental safe RV antifreeze and suction it into the ballast pumps.

_________________
My opinion is my opinion!
-> Glyde Clothing <-
Back to top
View user's profile Send private message Send e-mail Blog AIM Address Yahoo Messenger
DRAGON88
Ladies Man
Ladies Man


Joined: 12 Jan 2003
Posts: 8213
City: Portland, OR

PostPosted: Nov 05, 2006 6:33 pm    Post subject: Reply with quote

Shawn Madison wrote:
DRAGON88, Forgot about the heatercore. I had to replace one of those just this past year.

Use environmental safe RV antifreeze and suction it into the ballast pumps.


I don't know man, the steaming hot carpet mod is pretty sweet in the early springtime. Wink

_________________
wakeboards
wakeboarding
Back to top
View user's profile Send private message Send e-mail Visit poster's website
fourwinns18
Newbie
Newbie


Joined: 11 Dec 2006
Posts: 1

PostPosted: Dec 12, 2006 4:32 pm    Post subject: Engine Block - Homeowners Ins Reply with quote

Hello, you might want to contact you Homeowners/renters ins. agent. If the crack happened from a "hard impact while operating the boat" and a mechanic will sign something to that effect, your ins will cover it. If not, try JB Weld if the integrity of the cylinder wall was not affected.
Back to top
View user's profile Send private message
Antoddio
Newbie
Newbie


Joined: 24 Jun 2006
Posts: 22
City: Milwaukee

PostPosted: Dec 12, 2006 6:51 pm    Post subject: Re: Engine Block - Homeowners Ins Reply with quote

fourwinns18 wrote:
Hello, you might want to contact you Homeowners/renters ins. agent. If the crack happened from a "hard impact while operating the boat" and a mechanic will sign something to that effect, your ins will cover it. If not, try JB Weld if the integrity of the cylinder wall was not affected.


You'd be a crook committning insurance fraud.

It may be covered under your policy without the lie, however they will probably raise your rates, and justifiably so.
Back to top
View user's profile Send private message Send e-mail
Fast351
Outlaw
Outlaw


Joined: 08 Sep 2003
Posts: 133
City: Dayton, MN

PostPosted: Dec 15, 2006 3:09 pm    Post subject: Reply with quote

That 220 HP 5.0 is just a Chevy 305 that's marinized. Since the only thing broken is the block (assuming it's the block) it should cost you NO MORE than $2K to have an engine shop rebuild it, since they can reuse all the internals. You're basically doing a block prep on a stock block, which is around 1000 bux, including the block, and doing a teardown and assemble. Hell, there used to be a local shop around here that sold assembled longblocks of common vintage (which the Chevy 305 definitely is) for $750.

The labor to R&R an engine in an I/O shouldn't be too bad either, they're pretty accessible.

I guess what I'm trying to say is shop around. $9700 is way high. I would expect it to cost no more than $4000 if you take a completely hands off approach. Remember, a Mercruiser crate engine is the most expensive way to fix it, but certainly not the only one.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Shawn Madison
Old School Freak
Old School Freak


Joined: 12 Jan 2003
Posts: 2853
City: Norris, TN

PostPosted: Dec 16, 2006 4:56 am    Post subject: Reply with quote

Fast351, Props! Idea
_________________
My opinion is my opinion!
-> Glyde Clothing <-
Back to top
View user's profile Send private message Send e-mail Blog AIM Address Yahoo Messenger
stunta666
Newbie
Newbie


Joined: 01 Aug 2006
Posts: 31

PostPosted: Dec 16, 2006 1:46 pm    Post subject: Reply with quote

thanks 351. right now we pulled it out of the stealership and its at a mechanic friend of ours. he told me it was a chevy block too and it would be fairly easy for a new block swap, so hes gonna do it. any thing we should look out for?
Back to top
View user's profile Send private message
wesgardner
Wakeboarder.Commie
Wakeboarder.Commie


Joined: 16 Aug 2003
Posts: 1507
City: Severna Park

PostPosted: Dec 19, 2006 12:31 pm    Post subject: Reply with quote

stunta666, You can get an idea of what the block will cost from Summit or jegs - they've both been around awhile....obviously re-use your current motor's starter, alt. fule delivery system, heads (have them gone over by a machine shop just for yucks), etc. etc...some of these hot-rod shops are REALLY knowledgable in what they do and many are willing to "talk shop" if your attitude is positive.

Good luck - that initial price is WAY high

_________________
just broad reachin' thru life...
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Wakeboarder Forum Index -> Wakeboard Boat General Discussion All times are GMT - 8 Hours
Goto page 1, 2  Next
Page 1 of 2

Add To Favorites

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
             


Copyright © 2012 - Wakeboarding - Wakeboarder.com - All Right Reserved
Powered by phpBB © 2001, 2005 phpBB Group