| View previous topic :: View next topic |
| Author |
Message |
Willy Outlaw

Joined: 01 Feb 2004 Posts: 159 City: Montreal
|
Posted: May 01, 2006 5:06 pm Post subject: Draft - what does 22" really mean? |
|
|
| The owners' manual for my 04 Mobius LS says it needs 22" draft. Would that mean without any people or weight in it, or fully weighted at legal capacity. |
|
| Back to top |
|
 |
|
|
RoughRiverMike Outlaw

Joined: 08 Dec 2005 Posts: 107 City: louisville
|
Posted: May 02, 2006 3:50 am Post subject: |
|
|
Good question. My guess would be with the at the legal capacity. _________________ I didn't do it, nobody saw me, can't prove anything! |
|
| Back to top |
|
 |
siuski Soul Rider


Joined: 13 Mar 2003 Posts: 251 City: Southern, IL
|
Posted: May 02, 2006 7:57 am Post subject: |
|
|
I would assume that it is a consertive number and is without anyone/ballast/etc. Just to be safe  _________________ Don't look at me in that tone! |
|
| Back to top |
|
 |
E.J. Ladies Man


Joined: 15 Jan 2003 Posts: 7597 City: Mogadishu
|
Posted: May 02, 2006 8:25 am Post subject: |
|
|
| I have always assumed that it meant dropped in the water fresh. No people, gear, gas ect.... |
|
| Back to top |
|
 |
Willy Outlaw

Joined: 01 Feb 2004 Posts: 159 City: Montreal
|
Posted: May 02, 2006 8:45 am Post subject: |
|
|
| I'm surprised no-one knows for sure. I'll contact Moomba and try to find out. I'll let you know. |
|
| Back to top |
|
 |
Ian_82 Addict


Joined: 24 Mar 2005 Posts: 803 City: Longview, WA
|
|
| Back to top |
|
 |
siuski Soul Rider


Joined: 13 Mar 2003 Posts: 251 City: Southern, IL
|
Posted: May 02, 2006 9:26 am Post subject: |
|
|
Ian_82, depth of running gear (which ever is deepest prop, rudder, tracking fins, wedge, etc) measured from waterline. _________________ Don't look at me in that tone! |
|
| Back to top |
|
 |
BobL Newbie

Joined: 15 Mar 2006 Posts: 33
|
Posted: May 02, 2006 10:43 am Post subject: |
|
|
Several defintions found on the internet but this one uses the term "fully-laden". Laden definition is "loaded", "burdened", "weighed down".
"In nautical parlance, draft or draught is the depth below water's surface of the lowest part of a ship or boat. Draft is usually determined for a fully-laden vessel."
Other definitions also add "in calm water" and "standing still (not underway)". I conclude that it appears it is the minimum amount of water needed to float a fully-loaded vessel in calm water. |
|
| Back to top |
|
 |
darty Addict


Joined: 18 Mar 2003 Posts: 522 City: Lexington
|
Posted: May 02, 2006 11:25 am Post subject: |
|
|
| so, if i understand correctly, BobL is saying that the draft is how deep the boat is when weighted to capacity (as specified by the manufacturer) |
|
| Back to top |
|
 |
BobL Newbie

Joined: 15 Mar 2006 Posts: 33
|
|
| Back to top |
|
 |
tball Wakeboarder.com Freak


Joined: 24 Feb 2004 Posts: 3953
|
Posted: May 02, 2006 10:17 pm Post subject: |
|
|
If you start getting into it you could make a list of dozens of parameters that would affect draft - if by only an infinitely small amount. The couple that came to me were water salinity, temperature, and elevation/altitude. I wonder how the manufacturers get their figures...my guess would be they take a fully loaded boat on whatever body of water they have access to (likely an indoor tank with municipal water in it, at or near room temp). They probably take a measurement and add 25-30% for safety and go with it.
...if someone finds out or knows how they really do it please fill us in. _________________
| GOB Bluth wrote: | | It's a jetpack, Michael. What could possibly go wrong? |
|
|
| Back to top |
|
 |
pilot_ryder Wakeboarder.Commie


Joined: 15 Sep 2005 Posts: 1296 City: edmonton
|
Posted: May 03, 2006 6:49 pm Post subject: |
|
|
| sorry to interupt but since were talking about draft does anyone know how deep the 22ve sits in the water? |
|
| Back to top |
|
 |
Kewlboarder27r Soul Rider

Joined: 16 Jun 2005 Posts: 497 City: Mound
|
|
| Back to top |
|
 |
|
|
|