Wakeboarder Forum Index

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   StatisticsStats   FavoritesFavorites   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages  Log inLog in 
BlogsBlogs   

Speedometer Pickup

 
Post new topic   Reply to topic    Wakeboarder Forum Index -> Wakeboard Boat General Discussion
View previous topic :: View next topic  
Author Message
Burgh
Newbie
Newbie


Joined: 15 Apr 2006
Posts: 9

PostPosted: Apr 25, 2006 4:00 pm    Post subject: Speedometer Pickup Reply with quote

Allo! On my brand new boat, the speedometer stopped working on the third run out. I checked the pickup and it's facing straight up instead of down. I was told it should be pointing down and about a 30degree or so angle away from the stern of the boat. I couldn't bend it down with any amount of pressure without breaking it so I just bought a new one. I basically want to make sure the new one is installed right. Does anyone have a picture of what it should look like on the boat? I can't find a picture online anywhere. The little tube that connects to the pickup is pushed down onto the stem but doesn't seem like it's very stable that way. Any help is appreciated.

-Burgh the boat noob
Back to top
View user's profile Send private message
McFly
Outlaw
Outlaw


Joined: 15 Jan 2003
Posts: 210
City: Edmond

PostPosted: Apr 25, 2006 6:49 pm    Post subject: Reply with quote

Typically, if you hit a large piece of debris, the speedo pickup is designed to snap into an up position instead of breaking off. It is like a built in saftey feature so you don't have to replace speedo pickups all the time.

The amount of force shouldn't be too great to snap it back down into place, but it does need to be more than you would think. Remember, you get a lot of water pressure on that pickup when the boat is going 30+ mph, so the pressure needs to be pretty high to reach that break point.

McFly
www.waterskiboatsdallas.com

_________________
http://www.NStockNow.com
Back to top
View user's profile Send private message Visit poster's website AIM Address
Burgh
Newbie
Newbie


Joined: 15 Apr 2006
Posts: 9

PostPosted: Apr 25, 2006 8:07 pm    Post subject: Reply with quote

Well I know what you are talking about, on the new one. It bends back and locks upward so as not to break, but the old one is locked perfectly upright. I even put it in a vice grip and wrenched down to try and trip it back into the down position and it wouldn't budge. I'm sure it was just defective. Since I've replaced it, I'll test it tomorrow and see how it goes. Thank you for your response
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Wakeboarder Forum Index -> Wakeboard Boat General Discussion All times are GMT - 8 Hours
Page 1 of 1

Add To Favorites

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
             


Copyright © 2012 - Wakeboarding - Wakeboarder.com - All Right Reserved
Powered by phpBB © 2001, 2005 phpBB Group