| View previous topic :: View next topic |
| Author |
Message |
TOTALL Outlaw


Joined: 20 Jul 2003 Posts: 246 City: Kankakee,IL
|
Posted: Apr 02, 2006 6:00 pm Post subject: Running while the balast is filling?? |
|
|
Has anyone ran there boat at pull speeds or at idle and filled the balast?
Will the balast fill quicker?
Do you think this would be hard on the balast pump motors or on the impellers inside the pumps?
Thanks _________________ "Was it over when the germans bombed pearl harbor" --Animal house.
"Face it,you f--ked up you trusted us!!!"--animal house.
"Hey baby want to make fourteen dollars the hard way??"--Rodney dangerfeild-caddyshack. |
|
| Back to top |
|
 |
|
|
jamesriver-rider Soul Rider

Joined: 09 Mar 2005 Posts: 250 City: richmond city
|
Posted: Apr 02, 2006 6:06 pm Post subject: |
|
|
| We do it all the time no differnce in fill speeds, still slow as crap, I dont think its too hard on anything cause like the way the strainers on the bottom is like cut so that water enters fromt eh rear of the strainer and cant be forced in throught the front, but my problem is were running 1 inch lines all over the boat but the shut off celenoid is 1/2 inch so it slows everything way way down but we cant find a bigger one to replace it without spending $$$ |
|
| Back to top |
|
 |
Natman Addict

Joined: 13 Jan 2006 Posts: 873 City: Eddy TOWN
|
Posted: Apr 03, 2006 6:28 pm Post subject: |
|
|
| are you talking about an integrated system? i know most of the new boats, ex. calabria or the new wakesetters, you can be driving around while their filling, for the calabria takes like 50 seconds, for the bu like 5 minutes while driving, not sure hwo the pumps handle it |
|
| Back to top |
|
 |
thong142 Newbie


Joined: 25 Feb 2006 Posts: 36 City: Acworth
|
Posted: Apr 04, 2006 9:57 am Post subject: |
|
|
| 50 seconds for the calabria? What is that 25 pnds. of ballest. My new Supra 21v can be filled at speed. though takes around 10 min. to fill. But, Im filling 1200lbs.. |
|
| Back to top |
|
 |
JV Wakeboarder.com Freak

Joined: 11 Oct 2005 Posts: 3881 City: San Diego
|
Posted: Apr 04, 2006 10:09 am Post subject: |
|
|
thong142,
calabria fills 700 lbs. in about half a minute and takes about 10 seconds to empty without the use of pumps. mastercraft has, by far, the fastest standard pump system for ballast. everyone else is playing catch up. i have to wait forever (about 8-10 minutes) for the center ballast (500 lbs.) to empty on my vlx |
|
| Back to top |
|
 |
Bambamski Wakeboarder.com Freak

Joined: 03 Apr 2003 Posts: 4405 City: Calgary
|
Posted: Apr 04, 2006 12:36 pm Post subject: |
|
|
TOTALL,
If you have an integrated system like an MC the pickup or water intake is underneath the boat and fills while you're standing still or moving. Shouldn't make a difference.
On my old MC (2001) the water intakes were at the back of the boat by the exhaust and the pumps wouldn't fill while moving because they were out of the water if the boat was on plane. You also had to back up to prime them. They took forever to fill.
MC I think for 05 put in some kick ass pumps finally and like JV said, they take about 2-3 minutes to fill now. I don't think their system is any better than all the rest, the only difference is they didn't put in cheap pumps anymore.
Calabria has by far the best system on the planet.\
So to answer your question, if your intake is on the bottom of the boat then it won't make a difference if you're moving or not. If it's set up in the back and will be out of the water if the boat is moving then you have youre answer. If you're just filling sacs with a regular pump and hose you have to sitting still for sure. |
|
| Back to top |
|
 |
TOTALL Outlaw


Joined: 20 Jul 2003 Posts: 246 City: Kankakee,IL
|
Posted: Apr 04, 2006 5:27 pm Post subject: |
|
|
| Bambamski wrote: | TOTALL,
If you have an integrated system like an MC the pickup or water intake is underneath the boat and fills while you're standing still or moving. Shouldn't make a difference.
On my old MC (2001) the water intakes were at the back of the boat by the exhaust and the pumps wouldn't fill while moving because they were out of the water if the boat was on plane. You also had to back up to prime them. They took forever to fill.
MC I think for 05 put in some kick ass pumps finally and like JV said, they take about 2-3 minutes to fill now. I don't think their system is any better than all the rest, the only difference is they didn't put in cheap pumps anymore.
Calabria has by far the best system on the planet.\
So to answer your question, if your intake is on the bottom of the boat then it won't make a difference if you're moving or not. If it's set up in the back and will be out of the water if the boat is moving then you have youre answer. If you're just filling sacs with a regular pump and hose you have to sitting still for sure. |
Thanks Bambamski
Thats just what I was looking for.I have a 2003 X-2 and the ballast pickup is on the bottom of the hull.
TOTALL _________________ "Was it over when the germans bombed pearl harbor" --Animal house.
"Face it,you f--ked up you trusted us!!!"--animal house.
"Hey baby want to make fourteen dollars the hard way??"--Rodney dangerfeild-caddyshack. |
|
| Back to top |
|
 |
|
|
|