Wakeboarder Forum Index

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   StatisticsStats   FavoritesFavorites   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages  Log inLog in 
BlogsBlogs   

1989 Supra Mariah Fix Up
Goto page 1, 2  Next
 
Post new topic   Reply to topic    Wakeboarder Forum Index -> Wakeboard Boat General Discussion
View previous topic :: View next topic  
Author Message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Mar 26, 2006 9:02 am    Post subject: 1989 Supra Mariah Fix Up Reply with quote

Last fall I bought a 1989 Supra Mariah

http://forums.wakeboarder.com/viewtopic.php?t=50061

I am now starting to get it ready for summer. It goes into the shop this week for a full tune up, change of fluids, compression test, and such. I know, I should have done a compression test BEFORE I bought the boat, but I was being impulisve at the time.

Anyway, I have been spending some time trying to clean up the interior, and I have some questions.

First, there is a built in cooler -- in the middle under the windshield. It is cracked and broken. I would like to replace it if possible. Are these available? Any idea where I could get one?

If I can't replace it, maybe I will try and find an regular cooler that will fit in the spot. Or maybe someone has a better idea?

Thanks

Jared




P1012279 (Medium).JPG

 Description:
 Filesize:  54.86 KB
 Viewed:  40287 Time(s)

Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Mar 26, 2006 9:05 am    Post subject: Reply with quote

Ok, that was just the first of many questions.

The next issue is the rubber matt under the driver's feet. Can I get a new one of these?

Any other ideas as to what I could here? I guess this is not really a problem, it just doesn't look very good.

Jared




P1012277 (Medium).JPG

 Description:
 Filesize:  63.34 KB
 Viewed:  40282 Time(s)

Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Mar 26, 2006 9:12 am    Post subject: Reply with quote

Next issue-- speedos. The boat has two speedos. When we did the lake test neither worked very well.

Upon closer examination I discovered that both lines were broken and fixed with little vacuum tube repair things. See picture. Note that in the picture, the little vacuum repair thing is broken, but I could replaced that pretty easy. I have only attached one picture, but both lines were broken and repaired in approximately the same place.

So, should I just try and replace the little white thing, or should I replace the whole lines?

Second, it looks like there might be a problem with the speedos themselves. They are still registering speed-- different speeds at that, while sitting in the trailer.

So what should I do about that?

Thanks

Jared




P1012276a (Medium).JPG

 Description:
 Filesize:  25.43 KB
 Viewed:  40279 Time(s)



P1012276 (Medium).JPG

 Description:
 Filesize:  68.17 KB
 Viewed:  40279 Time(s)

Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Mar 26, 2006 9:16 am    Post subject: Reply with quote

Ok, one more for now.

There is a plastic box in the rear of the boat. Over the gas tank, under the pad. Here is a picture. The picture shows the box out, sitting on the back of the boat, but you get the idea.

This thing is all cracked up. Can I get a new one of these? Can I repair this box? I thought about fiberglass repair, but I have never done that before. Maybe duct tape is the best solution. That is what the previous owner used.

Jared




P1012275 (Medium).JPG

 Description:
 Filesize:  54.37 KB
 Viewed:  40276 Time(s)



P1012274a (Medium).JPG

 Description:
 Filesize:  38.3 KB
 Viewed:  40276 Time(s)

Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Mar 26, 2006 9:22 am    Post subject: Reply with quote

Ok, one more question

Normally I like to do my own maintenance. It looks like this boat would be really tough to change the oil on. I am not sure how you would get the oil out. I was thinking of having the shop put one of those oil-drain hoses on it, so I could drain the oil out the plug hole on the bottom of the boat. I figured it would be easy for them to do if they are already changing the oil.

Good idea?

Jared

_________________
89 Supra Mariah
Back to top
View user's profile Send private message
jayc
Newbie
Newbie


Joined: 12 Aug 2005
Posts: 14

PostPosted: Mar 26, 2006 11:43 am    Post subject: Reply with quote

1. The cooler could be fixed up good as new with some fibreglass and a bit of work.
2. Doubt you can get an exact mat but you may be able to cut something else to fit.
3. Replace the speedos, lines and pick ups. Not expensive and it will make life so nicer for riding. Yeah you could most likely patch it up but I'm guessing the guages are siezed and may not be reliable after freeing them up.
4. The tray at the rear could be fixed the same was as the cooler. Both are easy enough jobs even for a glass newbie.
5. Yes get a drain hose put on the pan. It makes oil changes a breeze. Just pull the hose through the drain and either let it drain naturally (I normally leave mine over night) or attach a pump to the hose and suck it out.
Back to top
View user's profile Send private message
3205lpv
Newbie
Newbie


Joined: 17 Oct 2005
Posts: 34
City: Kennesaw

PostPosted: Mar 26, 2006 11:53 am    Post subject: Reply with quote

I agree with everything said except for the oil. I would get a pump that goes down the dipstick. We had the old line through the drain hole, but it always made a mess with oil in the hose, and i just didnt like the system. The dip stick pump we have was 30 dollars and has a two gallon tank that the oil goes in to.
Congratulations on the boat we have a supra sunsport I am not sure if they are the same hull, but ours puts out a great wake. There is a pic of ours in my profile.
Back to top
View user's profile Send private message
midwesty
Wakeboarder.Commie
Wakeboarder.Commie


Joined: 25 Jun 2003
Posts: 1028
City: Vegas

PostPosted: Mar 26, 2006 1:34 pm    Post subject: Reply with quote

what about using some rhino-lining type material to fix the cooler and tray?it would clean it up nicely
_________________
Cummins powered
Back to top
View user's profile Send private message Blog
tball
Wakeboarder.com Freak
Wakeboarder.com Freak


Joined: 24 Feb 2004
Posts: 3953

PostPosted: Mar 26, 2006 1:52 pm    Post subject: Reply with quote

midwesty, that's exactly what I was thinking. You could use some cheap plastic lining (say from a milk jug) to patch the cracks, epoxy it in place and then spray the inside or both sides with white bed liner.
_________________
GOB Bluth wrote:
It's a jetpack, Michael. What could possibly go wrong?
Back to top
View user's profile Send private message Blog
Commodore
Ladies Man
Ladies Man


Joined: 20 Jun 2005
Posts: 11636

PostPosted: Mar 26, 2006 2:41 pm    Post subject: Reply with quote

sjp, all of the parts you talked about being cracked or broken can be bought from Supra and replaced. I replaced the plastic thing under the driver. They only offer fiberglass now, but it looks great!!!! Also comes with the traction mats.

Mine is a 90, and that year they ommitted the cooler for a big ski locker. But you should be able to repurchase one. And the rear tray is common, they also have those. Your local Supra dealer should be able to order you the parts.

I use a pump to remove the oil, it takes too long to let it drain, and makes a mess.

Gotta run, will type more later, the blondes beckon.
Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Mar 26, 2006 4:25 pm    Post subject: Reply with quote

Thanks for all the replies. I am pleasantly suprised to learn that I can get some of these interior parts from supra. Depending on prices, I think I may try and get a new cooler, a new floor mat, and try to do a fiberglass repair on the back tub.

I thought about getting a dipstick-oil change pump. Problem is, it looks like it would be impossible to pump the oil out of the dipstick. See the picture. I am not sure if all that is stock, but the way it looks it isn't even that easy to check the oil.

Correct me if I am wrong-- but can't you just feed a drain hose down plug? It seems like it wouldn't be that hard.

I am really excited about this boat. I hope the mechanics don't find too much wrong with it.

Thanks again

Jared

PS-- why are there two speedos anyway?




P1012277B (Medium).JPG

 Description:
 Filesize:  94.95 KB
 Viewed:  40202 Time(s)

Back to top
View user's profile Send private message
ttuclint
Addict
Addict


Joined: 12 Aug 2003
Posts: 984
City: Lubbock, TX

PostPosted: Mar 26, 2006 8:18 pm    Post subject: Reply with quote

when turning one speedo will stop reading due to it being out of the water.
Back to top
View user's profile Send private message
Commodore
Ladies Man
Ladies Man


Joined: 20 Jun 2005
Posts: 11636

PostPosted: Mar 27, 2006 6:56 am    Post subject: Reply with quote

sjp, that dipstick should be straight. Coming out the pan and straight up, not have angles in it. My oil pan's drain plug was a hose that had a fitting at the end. Does yours have this? If so just let it drain the old fashioned way through the drain plug in the hull.

The dual guages are for accuracy. Like ttuclint, said when turning they read different. These boats rely on precision speed so having accurate readings is crucial. Especially since some of these boats are used in tournaments. So basically it's like having a backup to make sure.

Glad the boat is coming along well.
Back to top
View user's profile Send private message
DizzyG
Soul Rider
Soul Rider


Joined: 11 Jun 2003
Posts: 266
City: Oconomowoc

PostPosted: Mar 28, 2006 2:42 pm    Post subject: Reply with quote

don't bother with the speedos, we just used the rpms and you'll get a more steady pull anyway!

Take out the cooler, add a water bag

_________________
This has been a DizzyG Message
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Mar 28, 2006 8:18 pm    Post subject: Reply with quote

Just a quick update. I spoke with the guy (Anthony Cooper) at Skiers Choice who is the parts guru. He said the rear box and the cooler are now longer available. He said the rubber mat can be replaced with a fiberglass cover and some non skid pads. I am still waiting for a price quote on those.

I think I will just do a duct repair on the rear box, but I might try my hand at fiberglass repair for cooler. I have never done anything like this. What do I need to do the repair? Can I buy some sort of fiberglass repair kit? And how do you make it smooth on the inside?

I also found out that that the airguide speedos are no longer available. Are there replacements available that might work? Or should I switch to a different kind of speedo? Or maybe I can fix these speedos? I know I can replace the line, but I don't know why they would be stuck in place.

Finally, I discovered that this boat does have an oil drain hose already.

Thanks again for your help.

Jared
Back to top
View user's profile Send private message
tball
Wakeboarder.com Freak
Wakeboarder.com Freak


Joined: 24 Feb 2004
Posts: 3953

PostPosted: Mar 28, 2006 8:42 pm    Post subject: Reply with quote

Autoparts stores sell fiberglass repair kits pretty cheap. I've never used one but I'd guess there's some craftsmanship involved. May want to practice on some scrap items first. A WB.com and internet search on DIY fiberglass repair would probably be worthwhile. I'm interested in that kind of stuff too, please post some pics if you do the repair. Duct tape repair is a delaying technique; you're going to have to do something more permanent before long.

I had those dual airguide speedos on a 96 Centurion. Have you tried simply dialing them down to zero with the plastic knob? If they'll dial to zero maybe they'll work properly if you clean the sensors out and replace the faulty tubing. I always thought there were two speedos so you could more readily see during tournament slalom pulls if one was miscalibrated (unlikely that two would fail by the same margin at the same time). Obsolete now with GPS and more reliable paddlewheel systems. Whatever...who knows?
Back to top
View user's profile Send private message Blog
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Mar 31, 2006 9:20 am    Post subject: Reply with quote

Crap Crap Crap

I have some bad news. Low compression on the port side. The starboard cylinders were all good 120-130. The port side on the other hand--- 90s—and get this 20, in the front port cylinder. 20!

I knew I should have got a compression test before I bought this boat. Great deals are never that great.

My mechanic says it is a chance it is just rust on the cylinder wall. I am not sure why that would be a “just” and not a huge problem. He is going to replace the impeller, run the engine for a while, and then retest that side. He says it MAY go up to acceptable levels.

The other bad news is that the fiberglass guy says he can’t fix my cooler. It is plastic. But he says he can duplicate it out of fiberglass for 250 bucks. That may be acceptable, but not with a potentially bad engine hanging over my head.

Crap again.

Jared
Back to top
View user's profile Send private message
watsoc
Addict
Addict


Joined: 23 Feb 2004
Posts: 574
City: Anthem

PostPosted: Mar 31, 2006 9:07 pm    Post subject: Reply with quote

Good luck with the ride. I knew a few people that had to replace their engine and it cost around $3000 for the new setup. Therefore it is not the end of the world and you can still get this boat in better shape. I see you are from Mesa so good luck with the ride and hopefully I will see you out on the water this summer.
Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Apr 07, 2006 7:27 am    Post subject: Reply with quote

Well, I have some good news and some bad news. After running the engine for a while, the compression came up and it ran ok. So I guess the engine will last a little longer.

I also have some bad news. The rudder was messed up. The boat people want to pull the gas tank to replace the whole rudder assembly. Sounds like it could be pricey, but I better have it done.

Jared
Back to top
View user's profile Send private message
texasbob
Newbie
Newbie


Joined: 07 Apr 2006
Posts: 3
City: Lake Jackson

PostPosted: Apr 07, 2006 8:15 am    Post subject: Reply with quote

Dual speedos are required for competition slalom skiing. If you decide to take them off they will fetch a VERY nice price on ebay. Those Airguides are no longer made and are very desirable among boat restoration. If you keep them replace the hose from pitot (on transom) to the speedo. You can save MUCHO dollars by doing this stuff yourself, rudder etc. There are many speedos that will work, Teleflex, Faria for 2. Check this site for repair and maintenance parts www.skidim.com
Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Apr 09, 2006 11:17 am    Post subject: Reply with quote

I am in the process of repairing the rudder. I pulled the gas tank myself to save some money. It was a huge pain.

The boat repair guys say they are going to replace the whole rudder assembly. I think that is a good idea, there is a lot of play in the old rudder.

One question I have though-- I think they are planning on replacing the rudder with a generic one. One like they sell here at Ski Dim

http://www.skidim.com/prodinfo.asp?number=DISC-RPTNSLOTASS

My Supra rudder looks totally different from that shape-- see the picture. What do you think of that? Why does the old supra rudder have that funky shape anyway?

Jared




P1012315 (Medium).JPG

 Description:
 Filesize:  62.41 KB
 Viewed:  39694 Time(s)



P1012325 (Medium).JPG

 Description:
 Filesize:  52.85 KB
 Viewed:  39694 Time(s)

Back to top
View user's profile Send private message
tball
Wakeboarder.com Freak
Wakeboarder.com Freak


Joined: 24 Feb 2004
Posts: 3953

PostPosted: Apr 09, 2006 2:05 pm    Post subject: Reply with quote

it looks like the Supra one has a lot more surface area...I'd go with one as close to OEM as you can just to make sure you don't lose turning performance (especially when weighted). it would be a shame to put the tank back in only to find out you've lost half of your turning authority. (IMHO of course...)
_________________
GOB Bluth wrote:
It's a jetpack, Michael. What could possibly go wrong?
Back to top
View user's profile Send private message Blog
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Apr 12, 2006 7:43 am    Post subject: Reply with quote

After thinking about this rudder issue, I contacted Anthony at Supra Parts again, and he said my style of rudder is no longer available. He said they now use one that is shaped more like the generic.

So my boat is now back to getting a new generic style rudder.

Jared
Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Apr 18, 2006 10:09 am    Post subject: Reply with quote

Well the bad news continues. Not too bad, but it is starting to add up. After pulling the rudder and the box, it was clear that the wood around the rudder was also damaged.

So, as long as we are at this point, we decided to call a fiberglass guy, and he is going to replace the wood that the rudder box attaches to. Then we can get the new rudder in, put the gas tank back in, and get this dang boat on the water.

Although I still need to replace the bunk boards. And the speedos.

Jared
Back to top
View user's profile Send private message
pilot_ryder
Wakeboarder.Commie
Wakeboarder.Commie


Joined: 15 Sep 2005
Posts: 1296
City: edmonton

PostPosted: Apr 19, 2006 5:57 pm    Post subject: Reply with quote

looks like you should have started fixing it up a while back now that summer is here
Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Apr 27, 2006 8:27 pm    Post subject: Reply with quote

pilot_ryder wrote:
looks like you should have started fixing it up a while back now that summer is here


Yeah, I am running just a little late-- it is supposed to be almost 100 degrees next week.

The good news is that the new rudder is finally in. I think it maybe smaller than the old rudder, but it sure is tighter.

Now I just need to fix my blower hose, replace my gas tank, and fix my trailer bunkboards.

Jared




P1010042 (Medium).JPG

 Description:
 Filesize:  49.8 KB
 Viewed:  38960 Time(s)



P1010040 (Medium).JPG

 Description:
 Filesize:  88.01 KB
 Viewed:  38960 Time(s)

Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: Apr 30, 2006 5:11 pm    Post subject: Reply with quote

Ok, next issue. I just opened the back hatch to work on getting the gas tank back in and noticed that there was some water under one of the mufflers.

I had just brought the boat home, and the boat has not been run for a couple of weeks, so I have no idea where that water actually came from.

But the first thing that came to mind was that it leaked out of the rubber muffler. Is that even possible? How can I test that before I put the gas tank back in? Can I put some more water in the muffler with a hose though the transom and see if more leaks out? Or is sticking a hose up your exhaust a really bad idea?

Jared
Back to top
View user's profile Send private message
Commodore
Ladies Man
Ladies Man


Joined: 20 Jun 2005
Posts: 11636

PostPosted: May 01, 2006 5:48 am    Post subject: Reply with quote

sjp, whoa there partner. Don't do that. Even though part of your cooling system lets water run out your exhaust, that's when the motor is running and the pressure keeps water from going into the block.

How much water are we talking here? Did they have to move the rubber while working on the rudder? Then residual water could have bled out when disconnected. Does your motor run? I forgot. If it does, hook a hose to it and let it run in the driveway. Then you'll see if it leaks. Could be a hose may need new clamps or re-tightening.
Back to top
View user's profile Send private message
LoudonTN
Addict
Addict


Joined: 28 Feb 2005
Posts: 785
City: Boat Mfg U.S.A. - East Tennessee

PostPosted: May 01, 2006 7:57 am    Post subject: Reply with quote

Is it not a possibility that it's rain water? I know I always have water piled up somewhere near the engine of my boat, and if I thought it was a engine problem everytime I'd be in trouble.
_________________
'05 Supra Launch 24SSV
Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: May 01, 2006 8:34 am    Post subject: Reply with quote

haugy wrote:
sjp, whoa there partner. Don't do that. Even though part of your cooling system lets water run out your exhaust, that's when the motor is running and the pressure keeps water from going into the block.

How much water are we talking here? Did they have to move the rubber while working on the rudder? Then residual water could have bled out when disconnected. Does your motor run? I forgot. If it does, hook a hose to it and let it run in the driveway. Then you'll see if it leaks. Could be a hose may need new clamps or re-tightening.


It was not a lot of water. Maybe a cup. I am really perplexed as to where it might have come from.

The boat runs, although it lacks a gas tank. And the gas tank covers the muffler in question. I guess I could start it and run it from a gas can.

If the muffler had a hole in it, it is underneath and hard to see. That is why I thought about putting some more water. Even if it was just a little bit.

I did put a flashlight in the muffler, to see if I could see light leaking out, but I did not see anything.

So could I put a glass full of water in it? Or should I just run it from a gas can? Or is there a better solution.

Jared

Now that I think about it, there is a small chance it was rain. We did have a sprinkling of water rain the other day, and the boat is tilted to the side that had the water. Still, it seems doubtfull, it was just a sprinkle for 5 minutes.
Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: May 05, 2006 8:32 am    Post subject: Reply with quote

Further updates:

I decided to gently put some water in the exhaust, just enought to fill the bottom of the muffler and started to flow back out the transom. I then checked to see if any leaked out the muffler, it didn't, so I think I am ok.

Next issue. Greasing the rudder. I am ready to put that tank back in, but something bugs me. The new rudder, like the old rudder, has grease nipples on the shaft. There is also a grease nipple on the steering cable.

How often do these things need to be greased? With what type of grease?

The reason I ask is that once I put the tank back in they will be impossible to get to. Someone told me that some newer boats have hoses that lead out so the rudder can be greased with the tank in. I would need a hose about 18 inches long for that to work for me. And the grease nipples threads are very small , and I don't think I have ever seen a hydraulic hose that small.

Should I just grease it up once, put the tank on and forget about it? Same with the steering cable?

Jared

_________________
89 Supra Mariah
Back to top
View user's profile Send private message
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: May 21, 2006 6:45 pm    Post subject: Reply with quote

Ok, I am almost ready to get this thing on the water. Good news considering it has been over 100 degrees for a while now. I still have a few issues, but at least it is close.

One question I have is about this nut on the drive shaft. See picture below. What is it for? Is it supposed to be screwed out like that? One reason I ask is that in Moser's thread he has pictures of his balast system in his Mariah and it is not screwed out like that.

I didn't personally check the alignment but the guys at the shop said it was ok. Although I am not sure they took it apart to check it.

Jared

Oh, and I ran the boat for a while (off a gas can) and confirmed that there was no water leaking from the mufflers, it must have been rain.




shaft nut.JPG

 Description:
 Filesize:  77.92 KB
 Viewed:  38338 Time(s)

Back to top
View user's profile Send private message
Commodore
Ladies Man
Ladies Man


Joined: 20 Jun 2005
Posts: 11636

PostPosted: May 22, 2006 5:48 am    Post subject: Reply with quote

That is the seal for the drive shaft. You'll see material on the inside of it (looking from front) It is to keep water out, but let the drive shaft turn smoothly. It should be fine, the screw threads will allow you to tighten it down if it gets worn. You don't want to do that unless it starts to leak BAD. My old Supra when towing would let in some water, it's okay. It's called a wet fitting, it's cork and gets wet and expands to fit around the shaft. And when moving alot, it will sometimes let water in. After 5 minutes of running and you have lots of water, that's too much. My bilge would kick on after about 20 or so minutes of riding.

My newer Mariah doesn't let a drop in. So each boat may be different. Put the boat in the water before you close it up. With all the work you have done to the hull you wanna be able to see where any leaks might come from, and if you have one, be able to fix it easily. Just go out with no cover, no seats and idle around a bit first. Find a ramp where you can leave your trailer in the water. So in case the worse happens you can just haul butt over onto your trailer. That's what I did. Once all was golden, went out and picked up speed and made sure all was good.
Then the seats finally came back in.
Back to top
View user's profile Send private message
wesgardner
Wakeboarder.Commie
Wakeboarder.Commie


Joined: 16 Aug 2003
Posts: 1507
City: Severna Park

PostPosted: May 22, 2006 8:25 am    Post subject: Reply with quote

Hey sjp,

As haugy says, the "fear" is OVERTIGHTENING that thing....you'll also hear it refered to as a "stuffing box" or "packing gland" - all the same animal....inside there are 3 "courses" of heavily waxed braided "rope" that are square in section - as you tighten the "big nut" they get compressed against the shaft and stop the water... the "small nut" is a lock nut and should be set so the "big nut" can't accidently turn....

Eventually you won't have any adjustemnt left, this is when you repack your stuffing box - not a big deal...my advice is go have fun with your boat this season (assuming the thing CAN be adjusted not to leak too bad) and repack it next spring (basically because you just don't know the history of the thing)

Wes

_________________
just broad reachin' thru life...
Back to top
View user's profile Send private message Send e-mail
sjp
Criminal
Criminal


Joined: 09 Apr 2003
Posts: 81
City: Mesa, AZ

PostPosted: May 26, 2006 9:55 pm    Post subject: Reply with quote

Well I finally got the boat in the water. Took it out twice had a good time. The boat is running, but it has lots of issues.

1) First, something is up with the tach. At least I hope it is the tach. We were moving along at a pretty good clip when I realized the tach said we were at less then 2k RPMs. My best guess is that the tach was reading half of what it should. I know that some tachs are adjustable for different engines ( 4 cylinder vs 8 cylinder) so I hope it is just set wrong. I will try and take the tach out tomorrow and see if I can figure it out.

2) Something is up with my shaft packing. There was a pretty fast drip coming out it. One drip right after another. I wouldn't say it was a "stream" of water, but it was close. I turned on the bilge pump every so often to empty it out. From my reading, I think this is too much leakage. I guess I am going to have to take the floor out again and learn about that shaft packing.

3) on a related note, the automatic bilge does not work at all. I need to find a wiring diagram for this boat.

4) one of the speedos is still not working at all. The other moves, but it is hard to tell if it is accurate. I will have to get a GPS to calibrate it.

5) gas gauge is not working. Bounces all over the places, and is too low. Probably the sender.

On a plus side, the boat seems pretty nice to wakeboard behind. The wake is a lot different from my IO.

And the best news? My little girl got up, and stayed up on her wakeboard.

Jared




little boarder.jpg

 Description:
 Filesize:  60.52 KB
 Viewed:  38130 Time(s)

Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Wakeboarder Forum Index -> Wakeboard Boat General Discussion All times are GMT - 8 Hours
Goto page 1, 2  Next
Page 1 of 2

Add To Favorites

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
             


Copyright © 2012 - Wakeboarding - Wakeboarder.com - All Right Reserved
Powered by phpBB © 2001, 2005 phpBB Group