Need help with speaker design

ADAM B KENDALL · Outlaw Joined: 25 Jan 2003 Posts: 128 City: Smith Mountain

Yo,
I am putting speakers on my pole and need a design for a 6 x 9 box that is easy release. I was gonna go with some 6 1/2s in some PVC cans but i need the 6 x 9 for more watts. I have came up with a design using a steel rod through the pole using u bolts to hold it up. but that wouldnt be easy release. thanks

this is the speaker box
[/url]

ADAM B KENDALL · Outlaw Joined: 25 Jan 2003 Posts: 128 City: Smith Mountain

U guys have no ideas????

RYDOG · Outlaw Joined: 13 Jan 2003 Posts: 163 City: NOR CAL

Do a search... I think it is someting like rynogear that might have something? not sure about that

Cowie · Posted: Apr 09, 2003 9:11 pm Post subject:

Rydog is correct. Ryno gear make some brackets that look pretty good. and are quick release. Wakeboardbaots.com sells them i think. NIce brackets but they are not cheap.

wpcustoms · Criminal Joined: 17 Mar 2003 Posts: 94 City: Austin

you dont need 6X9's to handle more power. This is one of the biggest misconceptions in mobile audio. Power is not what blows speakers, distortion does. When car audio mags test subs they are normally hooked up to a 1000 watt amp. They just dont run the sub beyond its limits. 6X9's dont sound as good as round speakers, due to there shape. I would stick with 6 1/2's

ADAM B KENDALL · Outlaw Joined: 25 Jan 2003 Posts: 128 City: Smith Mountain

so ur saying i could hear a 6.5 back 70 feet clearer and louder with 100 watts rms over a 6x9 with 200 watts rms??

Fishmaster · Posted: Apr 12, 2003 9:18 pm Post subject:

Check out www.diyTower.com, there's some good resources for both mounts and building your own cans out of PVC.

Deperatly need some slider & ramp plans for the site (hint, hint)

Bill