| View previous topic :: View next topic |
| Author |
Message |
QNev Wakeboarder.com Freak


Joined: 13 Aug 2005 Posts: 2707 City: Kamloops, BC
|
Posted: Aug 21, 2005 7:54 pm Post subject: Speed Change and Wake Issues |
|
|
Okay here's the thing.. We don't have a stainless steel prop and we're thinking of getting one for this one issue we have when pulling. The boat tends to speed up and slow down randomly. We have an alluminum prop on our boat which is a 190 HP with a 4.3 L V6. Would a stainless solve this or is it the engine?
Our 2nd is small problem with the wake. On the left side which I hit heelside (goofy) seems a lot more washed out then the other side which has a nice lip to it and it seems a little bigger and not washed. Is there a way to fix this? Or is it normal..?
Thanks  |
|
| Back to top |
|
 |
|
|
ttuclint Addict


Joined: 12 Aug 2003 Posts: 984 City: Lubbock, TX
|
Posted: Aug 21, 2005 8:02 pm Post subject: |
|
|
1. lower pitched prop
2. fat sacs
edit: i meant lower 
Last edited by ttuclint on Aug 21, 2005 8:15 pm; edited 1 time in total |
|
| Back to top |
|
 |
krbaugh Addict


Joined: 24 Jan 2003 Posts: 758 City: Edwardsville
|
Posted: Aug 21, 2005 8:09 pm Post subject: |
|
|
You have found one of the reasons people buy wakeboard boats
I/O's simple have a tough time holding speed.
a lower pitch prop might help definitely not a higher pitch prop!
You also need to add weight to the side of the boat that the wake is washed out |
|
| Back to top |
|
 |
QNev Wakeboarder.com Freak


Joined: 13 Aug 2005 Posts: 2707 City: Kamloops, BC
|
Posted: Aug 21, 2005 8:52 pm Post subject: |
|
|
Which side and where would fat sacs be placed? Front, Back, Middle, Left Right..? Thanks _________________
| Quote: | | Procrastination is like masturbation: Fun until you realize you're f***ing yourself |
|
|
| Back to top |
|
 |
krbaugh Addict


Joined: 24 Jan 2003 Posts: 758 City: Edwardsville
|
Posted: Aug 21, 2005 8:54 pm Post subject: |
|
|
| You also need to add weight to the side of the boat that the wake is washed out |
|
| Back to top |
|
 |
wesgardner Wakeboarder.Commie

Joined: 16 Aug 2003 Posts: 1507 City: Severna Park
|
Posted: Aug 22, 2005 4:25 am Post subject: |
|
|
Hey QNev,
Alotta boats are quite sensitive to weight distribution...sometimes just moving people around can make the difference - try this first as its the easiest - run at a constant speed, look at the wake, just move youeself from the dirver's side over to port, you should see a change in the wake.
From a general ballasting standpoint - if I recall, I/O's want a 60/40 weight distribution (60 forward and 40 in the stern)...the idea is to weight the bow and then using your trim function pull the stern down (incombination with sacs)...alotta this stuff is trial and be damned so you'll need some time to dial it in by moving stuff around.
As others have suggested, go with lower pitch, maybe more blades as well?
Oh yeah, try the Searh function on something like " I/O weight" and see what turns up, there's been a bunch of stuff posted here as well as some good articles in WakeBoarder mag on weighting/ballast.
Wes _________________ just broad reachin' thru life... |
|
| Back to top |
|
 |
-=LoneStar=- Addict


Joined: 20 Nov 2004 Posts: 751
|
Posted: Aug 22, 2005 7:44 am Post subject: |
|
|
| I would also recommend installing a "hydrofoil stabilizer" on the outdrive. It will help to stabilize the pitch attitude of the boat which can greatly affect speed stability on water that is not perfectly smooth. I'd recommend the least foil-like one available since you don't actually want lift for wakeboarding. The Cobra one from Overton's looks pretty good in that respect. |
|
| Back to top |
|
 |
vette74 Wakeboarder.Commie


Joined: 30 Jul 2003 Posts: 2144 City: Houston
|
Posted: Aug 22, 2005 10:08 am Post subject: |
|
|
A 4-blade lower pitch aluminum prop helped my boat hold speed a lot better and they are only $100 or so on ebay. _________________ There'll be two dates on your tombstone/ And all your friends will read 'em/ But all that's gonna matter is that little dash between 'em... |
|
| Back to top |
|
 |
QNev Wakeboarder.com Freak


Joined: 13 Aug 2005 Posts: 2707 City: Kamloops, BC
|
Posted: Aug 22, 2005 2:56 pm Post subject: |
|
|
Hey JW...we go like 22-23 MPH usually.. is that too fast? _________________
| Quote: | | Procrastination is like masturbation: Fun until you realize you're f***ing yourself |
|
|
| Back to top |
|
 |
AndyDeeJay Outlaw


Joined: 20 Jul 2004 Posts: 239 City: Belfast
|
Posted: Aug 22, 2005 4:11 pm Post subject: |
|
|
ideal speed in my view. _________________ Wakeboarding is so Kool in Ireland! |
|
| Back to top |
|
 |
bmartin Addict

Joined: 05 Feb 2003 Posts: 794
|
Posted: Aug 22, 2005 4:53 pm Post subject: |
|
|
| In addition to lower pitch prop(pitch more important than material though stainless is better), hydrofoil/stbilizer and weight, try putting more weight up front and trim up as much as possible withou porposing. |
|
| Back to top |
|
 |
QNev Wakeboarder.com Freak


Joined: 13 Aug 2005 Posts: 2707 City: Kamloops, BC
|
Posted: Aug 23, 2005 10:24 pm Post subject: |
|
|
Do we really want to trim up..? I feel it makes the wake crappier and it seems to be harder to steer _________________
| Quote: | | Procrastination is like masturbation: Fun until you realize you're f***ing yourself |
|
|
| Back to top |
|
 |
|
|
|