| View previous topic :: View next topic |
| Author |
Message |
WakeProdigy Criminal


Joined: 11 May 2003 Posts: 51 City: Dallas
|
Posted: Aug 22, 2005 9:20 am Post subject: Supra 21V owner's what are you PP settings? |
|
|
| So, I've been messing with my PP setting to try and get it to hold speed. No luck. I figured I would see what everyone else has theirs set at. I have about 2200 lbs of ballast and I am using the wakeboard prop. I try to pull at 22 mph, and the current PP settings are KDW=185, NN = 65. |
|
| Back to top |
|
 |
|
|
AZMXER Outlaw


Joined: 30 Aug 2004 Posts: 223 City: Peoria,AZ
|
Posted: Aug 22, 2005 12:24 pm Post subject: |
|
|
| Thats about what ours is set at. Ill check for sure when im out today. W/ that much weight our boat always has a hard time holding speed. Dealer has a new PP servo and computer waiting for me, but its not going to change anything its been this way since day one. My last resort was the WB prop and w/ you running it w/ no luck????? I will say the slower you roll into your PP speed the better. |
|
| Back to top |
|
 |
ATXParrothead Outlaw

Joined: 02 Jul 2003 Posts: 129 City: Austin, TX
|
|
| Back to top |
|
 |
Geoff Standish Addict

Joined: 13 Jan 2003 Posts: 843 City: Calgary
|
Posted: Aug 22, 2005 1:31 pm Post subject: |
|
|
WakeProdigy, I've found that there is a big difference in PP performance depending on wake plate setting. With my plate all the way up and that much weight it has trouble maintaining speed. If you run that much weight with the plate about half way up it seems to do alright. If you like I can check mine this evening? _________________ Riders Inc. |
|
| Back to top |
|
 |
WakeProdigy Criminal


Joined: 11 May 2003 Posts: 51 City: Dallas
|
Posted: Aug 22, 2005 1:34 pm Post subject: |
|
|
| Geoff, it'd be great if you could check. The most I run my wakeplate is 25% up, not not very much. |
|
| Back to top |
|
 |
Geoff Standish Addict

Joined: 13 Jan 2003 Posts: 843 City: Calgary
|
Posted: Aug 22, 2005 6:37 pm Post subject: |
|
|
WakeProdigy, I checked it out. I'm not perfect pass expert but these are my numbers...
KDW - 1490
NN - 100
I'm not sure if they make any sense but they work for me. I've had full ballast and 10 people and this setting does great. The only time I see it struglling is when we have our plate all the way up and even then it's not that bad.
It's +/- 0.75 mph which I think is adequate. When we're going in a straight line it's more like +/- 0.5 mph.
Anyway, hope that helps. Give this setting a try and let me know how you make out...
Good luck _________________ Riders Inc. |
|
| Back to top |
|
 |
WakeProdigy Criminal


Joined: 11 May 2003 Posts: 51 City: Dallas
|
Posted: Aug 22, 2005 7:54 pm Post subject: |
|
|
| Wow! 1490? that is really high. |
|
| Back to top |
|
 |
Diggs Addict


Joined: 27 Jan 2004 Posts: 627 City: Portland
|
Posted: Aug 23, 2005 6:03 am Post subject: |
|
|
i think i have been running about 150 and 80. mine seems to hold speed pretty well now....
I am running the same ballast config as you... wake plate almost all the way up |
|
| Back to top |
|
 |
Geoff Standish Addict

Joined: 13 Jan 2003 Posts: 843 City: Calgary
|
Posted: Aug 23, 2005 6:13 am Post subject: |
|
|
Alright dumb question, is 1490, 149? Or is mine wicked high? _________________ Riders Inc. |
|
| Back to top |
|
 |
ATXParrothead Outlaw

Joined: 02 Jul 2003 Posts: 129 City: Austin, TX
|
Posted: Aug 23, 2005 6:40 am Post subject: |
|
|
1490 is beyond wicked high.....i doubt it even goes that high.
how much of a variance is "acceptable" do you guys think? mine will run anywhere from .5 - 1.2 from the set speed. It seems like lately its been worse than it use to be back around 75-100 hrs. Now w/ nearly 150hrs it seems to be the worse its ever been(.5 - 1.2 off).
The settings before lastnight were at like 176 and 80. |
|
| Back to top |
|
 |
Geoff Standish Addict

Joined: 13 Jan 2003 Posts: 843 City: Calgary
|
Posted: Aug 23, 2005 7:17 am Post subject: |
|
|
That's kind of funny, I bet in the begining I was frustrated with the perfect pass and just set it really high. Oh well, seems to work for me now. Give it a try, see what you think. Aint hurting anything right! _________________ Riders Inc. |
|
| Back to top |
|
 |
wake eater Soul Rider

Joined: 04 Feb 2005 Posts: 272 City: knoxville
|
Posted: Aug 23, 2005 4:49 pm Post subject: |
|
|
| if you're only raising your wakeplate 25%, you are really missing out. the best setting is about 3/4 of the way up. i guessing my pp settings are 180 & 90. i'm running @ 2400lbs. |
|
| Back to top |
|
 |
WakeProdigy Criminal


Joined: 11 May 2003 Posts: 51 City: Dallas
|
Posted: Aug 23, 2005 6:28 pm Post subject: |
|
|
| I'll give it a try. I never really ran it that high before becuase I couldn't hold speed. I like 25% because the wake is nice and smooth, and I get great pop with this setting. |
|
| Back to top |
|
 |
supralaunch21V Newbie

Joined: 22 Dec 2004 Posts: 18 City: Seattle
|
Posted: Aug 24, 2005 12:11 pm Post subject: |
|
|
| Agree with wake eater on the plate setting. I have noticed that 3/4 up gives more vertical pop where 1/4 up was giving more horizontal carry. |
|
| Back to top |
|
 |
WakeProdigy Criminal


Joined: 11 May 2003 Posts: 51 City: Dallas
|
Posted: Aug 24, 2005 8:19 pm Post subject: |
|
|
| 3/4 is a pretty good setting definatley some good pop there. As for PP goes. I checked my settings. KDW = 185. NN = 65. My opinion: PP sucks, at least the one I have. Even if I roll into the set speed slowly the boat overshoots the speed to about 25mph (I have it set at 22) then never starts to back off. I definatley need to have the dealer look at it. |
|
| Back to top |
|
 |
|
|
|