2009 Ronix One 138

jeff7 · Outlaw Joined: 06 Jul 2005 Posts: 227 City: Monticello

Got a 2009 Ronix One 138 in great condition...only a few light marks from bindings can take more pics if needed...never been on sliders. $200 shipped within US. I'll also throw in some .8 ronix fins along with the stock 1"

I'm also selling the bindings if anyone is interested in them as well they are size 9's 09 ronix one's. $200 shipped within US

NKCrider · Posted: May 15, 2009 6:41 pm Post subject:

i may be interested. will it fit cwb hinge bindings?

jeff7 · Outlaw Joined: 06 Jul 2005 Posts: 227 City: Monticello

Im pretty sure they will...i'll see if i can find something on it.

NKCrider · Posted: May 16, 2009 9:01 am Post subject:

okay, thanks jeff7...

jeff7 · Outlaw Joined: 06 Jul 2005 Posts: 227 City: Monticello

Ok, I tried my wife's bindings which are LF bindings but are the standard hole pattern and they work fine. The 09 Ronix and 09 Liquid Force bindings would have to have an adapter to be ridden in this years new "all the way out" because they are on a smaller baseplate. 1 hole in is the same as last years all the way out. Hope this helps without confusing it too much....so the final answer is yes, lol

NKCrider · Posted: May 16, 2009 3:07 pm Post subject:

jeff7 · Outlaw Joined: 06 Jul 2005 Posts: 227 City: Monticello

Here is some information:

http://www.wakeworld.com/MB/Discus/messages/65919/678327.html

It looks like you should be fine if you have the 8 in.....if you had a 6 in plate you would need an extender to ride all the way out which would have come with your bindings if they are 09's. The LF bindings i put on it were 8 in hole to hole on the plate.

NKCrider · Posted: May 17, 2009 10:11 am Post subject:

sent you a pm, can you take pics of the bottom and any blems?

jeff7 · Outlaw Joined: 06 Jul 2005 Posts: 227 City: Monticello

Sold...