| View previous topic :: View next topic |
| Author |
Message |
Wolf Soul Rider


Joined: 10 Mar 2006 Posts: 424 City: Coeur D'Alene
|
Posted: Dec 23, 2007 10:15 pm Post subject: SCREWED |
|
|
Wow. Irritated doesn't even BEGIN to describe it.
I've got an '88 4Runner. I bought this truck knowing it needed an engine.
I finally found one on craigslist a few weeks ago.
Guy told me it was an '89 22R out of his 4Runner that got Tboned.
Said that he rebuilt it 50K ago, intake to pan.
Looked clean. He said it ran good. Talked him into $300 for it. Should bolt right into my truck.
I knew I was taking a gamble because I dont trust his rebuild job, but I figured if I gambled and lost I've got a rebuildable core to build up and drop in right? Wrong.
1. Tore the engine apart and once I got the valve cover off realized its a double row timing chain, AKA, the ones they stopped making in '82. Shouldnt be a huge problem, its still a 22R and should bolt right into my truck. I actually prefer the double row, alot stronger. Wrong again. Has to be an '83 or newer to go in my truck, exhaust and intake manifolds are different. SCREWED.
2. It wasnt even rebuilt! Old man cleaned everything visible, but once I took the pan off I reazlied that everything was stock...and had way more than 50K on it. It had a newish head. That was it.
POS.
The engine doesnt look bad at all, I have a feeling it will run fine. Too bad it doesnt fit into my truck without mods. Which I dont have money for. After I bought the engine I had $100, which is barely enough for a new clutch and intake and exhaust gaskets so I can drop it in.
So now I have an engine. Sitting in my garage.
He even said in the ad it will fit a '85-'95 4Runner. Thanks guy.
http://spokane.craigslist.org/pts/502866321.html |
|
| Back to top |
|
 |
|
|
jumalian Ladies Man

Joined: 12 Jan 2003 Posts: 7625 City: san diego
|
Posted: Dec 23, 2007 10:53 pm Post subject: |
|
|
have you asked him if he'll take it back? worth a shot. _________________ my demo reel
DPC Films
| Aubs wrote: | | I'm thinking some island. And Alaska is not a choice. |
|
|
| Back to top |
|
 |
Commodore Ladies Man


Joined: 20 Jun 2005 Posts: 11636
|
Posted: Dec 24, 2007 6:12 am Post subject: |
|
|
Wolf, ouch sorry man, as soon as you said double row, I thought.....wait a minute. See if he'll take it back. I sure as hell would. Don't call and ask, show up at his door with it.
You can still use it in your 4Runner. There are tons of guys doing the same. You do have to fab up some engine mounts, but google is your friend. I know you're on a tight budget, but to get engine mounts in your rig will run you about $200. That's parts, and getting it in if you know how to weld, or have a friend you can bribe with a 6-pack to do it for you.
The trick is the engine itself. You said it hasn't been rebuilt. Well now is the best time to do it. If you can dissassemble to the whole thing from pistons to crank, many shops will do it cheap. The big cost is the labor to tear it down, and put it back together. If you tear it down to a bare block, run it in there it shouldn't cost as much. I know I had a Chevy 350 bored out and dipped clean for $150. Then all I had to do was new pistons and rings and I was ready to go.
Don't give up on that 22R yet. It's a great motor. And if you don't want it, I'll take it off your hands...for free . It would go great in my new buggy project.  |
|
| Back to top |
|
 |
Wolf Soul Rider


Joined: 10 Mar 2006 Posts: 424 City: Coeur D'Alene
|
Posted: Dec 24, 2007 10:52 am Post subject: |
|
|
haugy, no way in hell am I paying anybody else to do it. Only thing I'll pay for is some machine work, and thats only because I dont have the tools to do it myself.
I would love to find a way to drop it in, but I'm in HS, I've got $100 for a clutch and gaskets to drop it in. So I'm not sure what I'm going to do because the 22RE in my truck now has got some nasty piston slap and rod noise, and it's on its last leg... |
|
| Back to top |
|
 |
Craig-R Guest
|
Posted: Dec 24, 2007 4:24 pm Post subject: |
|
|
MERRY CHRISTMAS!! i'm with haugy, just show up at his door with it |
|
| Back to top |
|
 |
Wolf Soul Rider


Joined: 10 Mar 2006 Posts: 424 City: Coeur D'Alene
|
Posted: Dec 24, 2007 4:57 pm Post subject: |
|
|
Craig-R, feel like dropping it on his house
Anybody have a crane I can barrow?
Helicopter maybe? |
|
| Back to top |
|
 |
Wolf Soul Rider


Joined: 10 Mar 2006 Posts: 424 City: Coeur D'Alene
|
Posted: Dec 29, 2007 1:49 pm Post subject: |
|
|
UPDATE
We called him to try and get our money back. He hung up on us.
So off we go to small claims... |
|
| Back to top |
|
 |
ohsix PityDaFool Who Posts This Much

Joined: 12 Jan 2003 Posts: 6837
|
Posted: Dec 29, 2007 4:28 pm Post subject: |
|
|
Wolf, I can think of a few potential solutions.
1. Sell the motor for what you've got in it and try to find one that fits.
2. Go make some money so you can afford to do the swap.
3. Sell the 4Runner and get something more reliable. |
|
| Back to top |
|
 |
Wolf Soul Rider


Joined: 10 Mar 2006 Posts: 424 City: Coeur D'Alene
|
Posted: Dec 29, 2007 5:16 pm Post subject: |
|
|
wes reeves, 4Runner is plenty reliable, 22REs are known to push 250K, its just the idiot who had it before me overheated it
I bought a new 22RE about a week ago, definate rebuilder
Cheapest way to go is to just rebuilt it
I can barely afford the swap right now, but that doesnt mean I'm gonna let this guy get away with my $300
with $300 I could cam it and bore it. Yes please. |
|
| Back to top |
|
 |
nickl011 Wakeboarder.Commie


Joined: 14 Jan 2007 Posts: 1711 City: Fargo
|
Posted: Dec 29, 2007 8:29 pm Post subject: |
|
|
Wolf, Did you sign a bill of sale of any kind? If not, that was your falt. The seller, if not, you should have drawn up a simple bill of sale stating that the engine is sold as is, then there wouldnt be any problems. It is also his fault for lying about it. That way if the bill of sale stated that the motor was sold as is, rebuilt that is, you could show it to a judge and you would get your money back. _________________ 04 LF Trip 133
06 LF Transits
01 Cassette Series |
|
| Back to top |
|
 |
DRAGON88 Ladies Man


Joined: 12 Jan 2003 Posts: 8213 City: Portland, OR
|
Posted: Dec 29, 2007 11:19 pm Post subject: |
|
|
LFPIMP, "As is" implies that there would be no guarantees as to the condition of the engine.
Unfortunately you got hosed, good luck getting anything out of him. Good luck. _________________ wakeboards
wakeboarding |
|
| Back to top |
|
 |
jjaszkow Wakeboarder.Commie

Joined: 25 Jul 2006 Posts: 2124 City: Some Airport
|
Posted: Dec 29, 2007 11:57 pm Post subject: |
|
|
Wolf, how much information was in the guy's Craiglist ad? The more information that he has provided about the initial condition, the better odds you have for proving your case. Sucks to hear about this though, I always hate to hear stories about people getting taken advantage of.
| LFPIMP wrote: |
That way if the bill of sale stated that the motor was sold as is, rebuilt that is, you could show it to a judge and you would get your money back.
|
Unless the condition was clearly documented and the words "as is" are not included in the bill of sale, I doubt that the judge would see it that way. D88 is right on, there is no gaurentee in that clause. Personally, I am generally somewhat skeptical of items sold "as is", especially if the seller is not too willing to detail issues / concerns about an item. However, if I sell something, I always document it "as is" unless I am willing to provide a full refund. |
|
| Back to top |
|
 |
joedirt00 Wakeboarder.com Freak

Joined: 15 Jul 2004 Posts: 2892 City: Baker City
|
Posted: Dec 30, 2007 7:14 am Post subject: |
|
|
Don't take this the wrong way, but when buying anything used, BUYER BEWARE. I think you are screwed. The only thing that you may have going your way is that the ad stated it would fit your truck. But I don't think that that is enough seeing it is a used item of this nature.
Good luck with it. _________________
| haugy wrote: | My advice:
-If you grab a girls hair, and it comes off in your hand, don't laugh, that could have been the best sex ever. |
|
|
| Back to top |
|
 |
Craig-R Guest
|
Posted: Dec 30, 2007 7:48 am Post subject: |
|
|
| joedirt00, it seems like the guy knowingly lied to try and sell the engine, which is illegal |
|
| Back to top |
|
 |
Commodore Ladies Man


Joined: 20 Jun 2005 Posts: 11636
|
Posted: Dec 30, 2007 12:21 pm Post subject: |
|
|
I hate to say this. But you're screwed. You bought it. You're stuck with it. Whether or not he lied is not illegal. He has no corporate license that says he must sell what he states. He's Joe Schmo. If I tell you I am selling you a Ferrari, but it's a Pinto, and you buy it. You're stuck with it.
I know, because this has happened to me. Thought I was getting one thing, but the guy changed serial numbers to sell it. Sure I can try and take him to small claims, but that takes time and money. Better off to just face it, you're stuck with it.
Learn from this. Anytime you ever expect to do a project, it always costs more. ALWAYS. If you were on that tight of a budget, you should have just rebuilt your current motor.
Face it, you got screwed, just like millions of others do everyday. Learn from it and move on. Work on a solution, not trying to backtrack the problem. You'll get up and running much faster that way.
This is coming from a guy who has gotten screwed, done everything wrong, and planned everything wrong on a project that took 2 years instead of 1. So trust me, I know how it feels. All I can do is live and learn, and the next time I will be better prepared. |
|
| Back to top |
|
 |
|
|
|