| View previous topic :: View next topic |
| Author |
Message |
FlyZone CR Wakeboarder.Commie

Joined: 25 May 2008 Posts: 1089 City: Nuevo Arenal, Costa Rica
|
Posted: Oct 23, 2010 10:12 am Post subject: Engine manufacturers |
|
|
What's all your opinions about the different engine brands? PCM vs Indmar vs Mercruiser vs ...?
Stuff like reliabilty, durability, service, anything.
Thing is that there's no dealers/mechanics for any of them here but Mercruiser. I now have a super basic 80's 351 block that anyone can work on, but when choosing a newer boat it'll get a bit more complicated with electronics etc.
Thanks! _________________ FlyZone Wakeboarding Costa Rica |
|
| Back to top |
|
 |
|
|
shonuff Criminal

Joined: 23 Aug 2010 Posts: 58 City: Atlanta
|
Posted: Oct 25, 2010 6:02 am Post subject: |
|
|
If I'm not mistaken Indmar, PCM, Mercruiser and Volvo Penta engines are rebranded GM engines that have been marinized.
If they're all using GM engines I'm not sure there's going to be a huge difference in reliability, durability, etc. between them.
Last edited by shonuff on Oct 25, 2010 6:18 am; edited 1 time in total |
|
| Back to top |
|
 |
neverwinter Criminal

Joined: 12 Aug 2010 Posts: 66
|
Posted: Oct 25, 2010 6:17 am Post subject: |
|
|
here's what i know:
mastercraft = pcm
nautique = pcm
tige = pcm
centurion = pcm
all have engine mgmt / user controls / rider settings etc licensed from pcm! if you live in an area where you are close to any of these shops, they can do your warranty work for you. |
|
| Back to top |
|
 |
FlyZone CR Wakeboarder.Commie

Joined: 25 May 2008 Posts: 1089 City: Nuevo Arenal, Costa Rica
|
Posted: Oct 25, 2010 8:38 am Post subject: |
|
|
Mastercraft doesn't use PCM but Indmar if I'm correct. Also do Moombo/Supra and Malibu/Axis. _________________ FlyZone Wakeboarding Costa Rica |
|
| Back to top |
|
 |
paus21 Outlaw


Joined: 02 Mar 2006 Posts: 180 City: Omaha/Woodcliff
|
Posted: Oct 25, 2010 8:49 am Post subject: |
|
|
FlyZone CR, correct.
MC = Indmar |
|
| Back to top |
|
 |
fish6942 Addict

Joined: 22 Feb 2006 Posts: 603
|
Posted: Oct 25, 2010 9:50 am Post subject: |
|
|
| Another correction: Centurion = Merc |
|
| Back to top |
|
 |
FlyZone CR Wakeboarder.Commie

Joined: 25 May 2008 Posts: 1089 City: Nuevo Arenal, Costa Rica
|
Posted: Oct 25, 2010 1:25 pm Post subject: |
|
|
Anyone who works in this industry knows what's the minimum to set up kind of a 'servicepoint' or something for Indmar/PCM? _________________ FlyZone Wakeboarding Costa Rica |
|
| Back to top |
|
 |
Brit Rider Wakeboarder.com Freak


Joined: 29 Mar 2004 Posts: 3347 City: Cheshire, England
|
Posted: Oct 25, 2010 2:05 pm Post subject: |
|
|
neverwinter, Probably the most misleading bit of fiction I've ever read.
FlyZone CR, As Shonuff states, all these engines from the 3.0 all the way upto the 8.1's and beyond are basically GM blocks that have been marinised.
I'd argue PCM have the edge on their fuel system but Mercruiser are coming out with some really impressive electrical systems (mostly Smartcraft linked). Reliability wise I genuinely do not believe there is much in it, I see them all break... all seem to have the odd gremlin. It seems much more down to user care and regular use/servicing that effects reliability.
As you have access to a mercruiser service centre (not surprising as they have so many more dealers than anyone else - Read of that what you will) I'd strongly advise going down that route. As you have already mentioned - there's a lot of electronics in these newer engines which require the correct diagnostic equipment... having someone with this will make a huge difference even in the most simple of repairs.
Just my 2 cents on it _________________ www.AxisBoats.co.uk | www.Malibu-Boats.co.uk |
|
| Back to top |
|
 |
Brit Rider Wakeboarder.com Freak


Joined: 29 Mar 2004 Posts: 3347 City: Cheshire, England
|
Posted: Oct 25, 2010 2:10 pm Post subject: |
|
|
FlyZone CR, To answer the service question.
Youll generally be exected to have a strong mechanical background that is proveable by working in a dealership for several years, or have someone on board who meets this criteria.
You'll also generally be expected to invest a good few thousand dollars in spares and service items.
Purchasing the upto date diagnostic equipmenet will also be part of the deal unless you plan on just selling the parts, not being a service centre.
I can hook you up with parts at trade price but to be set up as a recognised service centre you'll need factory approval. _________________ www.AxisBoats.co.uk | www.Malibu-Boats.co.uk |
|
| Back to top |
|
 |
FlyZone CR Wakeboarder.Commie

Joined: 25 May 2008 Posts: 1089 City: Nuevo Arenal, Costa Rica
|
Posted: Oct 25, 2010 3:07 pm Post subject: |
|
|
Brit Rider, thanks man, some good info there.
Mercruiser would bring the options down to Sanger, Standard, ... what else?!
I'm thinking of distributing a boat brand here but since the market is, and will be for at least some time, very small I don't feel like investing tons in mechanical support (i.e. starting PCM or Indmar dealership or something). _________________ FlyZone Wakeboarding Costa Rica |
|
| Back to top |
|
 |
Brit Rider Wakeboarder.com Freak


Joined: 29 Mar 2004 Posts: 3347 City: Cheshire, England
|
Posted: Oct 26, 2010 12:25 am Post subject: |
|
|
FlyZone CR, Mercrusier would get you access to:
Sportique Boats
Centurion
Epic
Ski Supreme
Older Tiges
Sanger
Standard
Calabria
And a good few more.
In order to distribute a boat brand you'll generally be expected to buy 2-3 boats initially and then more fairly reguarly.
It may of interest to you that there are stacks of aftermarket diagnostic tools out there that do most if not all engine brands. So you can buy one tool that will cater for inboards, jetskis, outboard etc etc. It'd be advisable to check with your local service centre if they have such a tool as they may well still be able to service other brands based on this. Warranty may be another story though.... _________________ www.AxisBoats.co.uk | www.Malibu-Boats.co.uk |
|
| Back to top |
|
 |
|
|
|