dgravlin Newbie
Joined: 27 Jul 2010 Posts: 1
|
Posted: Jul 27, 2010 7:42 pm Post subject: |
|
|
Here is what we've come up with after a year of experimenting...
Fill factory ballast on port side and also fill the center ballast.
We have (5) FlyHigh Pro X Series V-Drive Sacs placed as follows...
(2) are placed in the port side rear locker, next to the factory ballast. The space does not allow both to be completely filled but between the two sacs, we get about 600# of ballast there.
(1) is placed under the port side seat bench, pushed as far back as possible. Again, the space does not allow it to be filled completely - probably about 250# of ballast.
(1) is placed on the floor up against the port side bench seat. This one is filled to capacity - 400#.
(1) is placed on the floor in the bow and it is filled close to capacity - about 350#.
We get a great wave out of it going 10.3 to 10.5mph, depending on the number of people in the boat. |
|