Binding compatible with diffrent brands?

wakeforlife · Newbie Joined: 04 Dec 2008 Posts: 9

Last your I bought an non-ridden pair of 06 LF Stances, well my board broke and I've been looking for a new board but don't really want to buy new bindings. So if i were to get a hyperlite board, or any other board for that matter, would I have very limited stance options if its not a LF board.

Chocoholic · Soul Rider Joined: 21 Feb 2009 Posts: 363 City: Dubai

Technically they should all be interchangeable. I have friends who have LF bindings on Hyperlite boards, or Ronix bindings on LF or other boards.

I mean every board has two sets of 4 drilled holes either side and bindings are meant to fit that, whether they have claw, screw or other types of fittings.

brotherbrown831 · Outlaw Joined: 26 May 2008 Posts: 154 City: Oklahoma City

I use LF bindings on one of my hyperlight boards. I have heard of some problems with Hyperlight hardware being to long for the insterts in other boards but I have had no problems with the LF hardware going into a HL insert.

J.unio.R · Outlaw Joined: 23 Feb 2009 Posts: 154 City: E-City, NC

I would check out the thread size first before buying the board. Some companies use different thread sizes in their inserts. I have Hyperlite bindings on a CWB board and its the best combo I have ever ridden. As said by brotherbrown831, Hyperlites hardware is different than LF.

Craig-R · Wakeboarder.Commie Joined: 19 Dec 2008 Posts: 1676

they will be compatible guaranteed