| View previous topic :: View next topic |
| Author |
Message |
Dees Wakeboarder.com Freak


Joined: 13 Jan 2003 Posts: 3548 City: Nampa
|
Posted: Mar 07, 2007 2:37 pm Post subject: Teak Vs Stain |
|
|
I posted this here because of the traffic compared to Boat forum
What is better to use. Teak oil or a oil based Stain.
My buddy wants to use an oil based stain that is dad recommend on the teak platform on the GS. His dad works at Home Depot, in the out door department and thinks it would be good to use. My buddy used it on the wood of his hot tub (he got a divorce and his wife sold the house and include the Hot tub) and he said it turned out pretty good, so I never got to see it. I just think there's a reason they use Teak Oil instead of stain but not sure. _________________
| haugy wrote: | | Your 14, you masturbate. There's your answer. |
| jt09 wrote: | | ont - like your money, your opinion loses value as it crosses the border. |
|
|
| Back to top |
|
 |
|
|
DRAGON88 Ladies Man


Joined: 12 Jan 2003 Posts: 8213 City: Portland, OR
|
Posted: Mar 07, 2007 2:43 pm Post subject: |
|
|
Oil. Teak has large open pors, putting a stain on it could clog the pors. What aren't you satisfied about with the teak oil? Clean it really good, then oil it and let it sit in the sun for a day, then add another coat. _________________ wakeboards
wakeboarding |
|
| Back to top |
|
 |
nmballa Wakeboarder.com Freak


Joined: 14 Jan 2003 Posts: 3906 City: Milwaukee
|
Posted: Mar 07, 2007 3:39 pm Post subject: |
|
|
I would use a finsih. We used to use a product called Epifan's wood finish. We would apply several coats of gloss and then finish with 2 or 3 matt. Or maybe it was reversed. I don't know. Looked damn good. Problem with teak oil is your gonna need to hit it several times a year for it to look half way descent, sun light just kill the look almost immedately. With Epifans you need to give it a good sanding and then apply the coast. Make sure you don't get a run or bristles in your coats. Apply one coat per day. The finish tends to hold up several years and if applied correctly it should look awsome. We used this method on every teak swim platform we built. If your platform has been hit with teak oil before you really need to sand it well. If you go with oil I would most definantly not set it in the sun after applying. Apply several coats at 6 or so hour intervals. Give it a very light sand between coats if desired. Also remember to toss your rags and brushes into metal canister when done. Teak oil/linseed oil can combust spontaniously. _________________ jt09 wrote:
I used to get all happy when the girlie would make a colonic appointment. That meant she was going to be breaking out the "fine china" soon.
http://www.facebook.com/profile.php?id=509037985&ref=profile |
|
| Back to top |
|
 |
Rocko Old School Freak

Joined: 12 Jan 2003 Posts: 3745 City: Omaha
|
Posted: Mar 07, 2007 3:54 pm Post subject: |
|
|
| We used teak oil for my buddy's boat. There was like a cleaner, oil, and then a finish. All three products were specifically for teak wood. |
|
| Back to top |
|
 |
|
|
|