| View previous topic :: View next topic |
| Author |
Message |
Brian Young Newbie

Joined: 17 Jan 2003 Posts: 22 City: Highland Village
|
Posted: Sep 18, 2006 8:47 pm Post subject: boat cover |
|
|
| I think it may be time for a new cover. Almost half of the straps plastic clasp are broken or the entire strap is ripped off the cover. I walked out today to check on the boat after a heavy storm this weekend and noticed the second seam in two weeks has split. I looked online and saw that Overton’s has decent prices ($300-600) depending on the material. However I’m concerned how well a mass produced cover will fit my boat especially around the tower. Does anyone have any experience with these covers or will my money be better spent at a local custom shop? What about having my current one repaired or is just a waist of money, the fabric looks good where it is not ripped?
|
|
| Back to top |
|
 |
|
|
Gmcc Newbie

Joined: 04 Jun 2006 Posts: 22 City: Gambrills
|
Posted: Sep 20, 2006 6:18 am Post subject: |
|
|
I have found that once a cover starts to break down, repairing it is just putting a band aid on the problem. As with most everything, you get what you pay for. A custom Sunbrella cover made locally will probably be the best, but will cost the most, if you only are looking for 4 to 5 years before you trade up, then a mass produced cover might work. The cover on my boat was made by Westland and they seem to make covers for many popular boats. Several people sell them at discounts.
http://www.westland-az.com/index.html
Good luck
Gil
|
|
| Back to top |
|
 |
deepcove Soul Rider

Joined: 15 Mar 2004 Posts: 296 City: Vancouver
|
Posted: Sep 26, 2006 8:01 pm Post subject: |
|
|
| I had a custom sunbrella cover made.....I am on year 3 and it is holding up great.
|
|
| Back to top |
|
 |
timmyDecker Outlaw


Joined: 22 May 2006 Posts: 187 City: Manhattan...KS
|
Posted: Sep 27, 2006 12:49 pm Post subject: |
|
|
Make sure you by a cover that is designed for a boat with a tower though. That will make a difference. If you can't find one, you will have to cut a slit from where the tower mounting points are, down to the edge of the cover, and then sew heavy duty velcro to either side to you can close the slit around the tower mounting points...did that make sense? Either way, a cover that isn't designed to accomodate a tower will not fit the way it's supposed to, so make sure you get the right one.
_________________ Whoever coined the term "Near Beer" was a very poor judge of distance... |
|
| Back to top |
|
 |
D. David Criminal

Joined: 11 Dec 2003 Posts: 71 City: Henderson, KY
|
|
| Back to top |
|
 |
|
|
|