Supra seat base screws

[finman]

I have some screws that are stripped out at the base that mounts to the floor. Is there something someone would recommend to put in the screw holes that will harden then I could put the screws back in?

Thanks,

Finman

[Geoff Standish]

finman, I had that happen in my Moomba. I used a two part epoxy adhesive. Injected it into the hole and screwed the screws back in. It seemed to hold pretty well.

[tmbrown]

another trick I've used for years in similar situations is just sticking a sliver of wood in the screw hole - or even breaking off a wooden matchstick - tightens up the threads nicely generally.