Pro Audio 300watt tower speakers??

cbaden · Newbie Joined: 10 May 2006 Posts: 5

Two 8" Mids
Two 1" Compression drivers
Frequency Range:55Hz-20kHz
Max output level: 112dB (1m)

How well am I going to hear this back on the rope?
Any comparisons or suggestions.

acurtis_ttu · Soul Rider Joined: 16 Aug 2004 Posts: 499 City: Houston

Push enough power and you'll be able to "hear" them. To be able to hear and for it to sound good there's a little more to it than throwing a couple drivers in a box. Do some searches you'll find recc. for crossovers and attenuation circuits to help clean up the sound.

akdoc · Newbie Joined: 24 Mar 2004 Posts: 43 City: Overland Park

You will be able to hear it, just make sure you use a good pro audio crossover matched well with your drivers. I custom made my hlcd setup and used 2 6.5" pro audio drivers with 2 HLCD's, they are crossed over at 3500hz, with about 350 watts rms to the whole setup. It is much louded than 4 car audio 6.5's. I wired everything in parallel, which shows the amp a 4ohm load. Good luck with the project and post some pics when you are done. Here is mine: