| View previous topic :: View next topic |
| Author |
Message |
Zack_Attack
Addict
Joined: 08 Mar 2005
Posts: 767
City: Corbin, Kentucky
|
 Posted: May 19, 2006 9:05 am Post subject: Re-Installing the servo motor today...what do I need? |
 |
|
I already posted this on Boat General Disc. but no one replied. I need to know what all tools I need. I am just replacing the motor itself...not the wires or anything, just the motor. I don't wanna have to lug a big tool box all the way down there to the boat if I don't need it, and yet I don't want to not have everything I need.
_________________
Holly Bay All The Way! |
|
| Back to top |
|
 |
|
|
CDawg
Outlaw
Joined: 29 Jul 2005
Posts: 130
City: Bellevue
|
| Posted: May 19, 2006 9:35 am Post subject: |
|
|
| Assuming you're talking about a Perfect Pass servo, you'll need a socket wrench set - can't remember the exact size - and a crescent wrench, pliers, or something else to hold the nylock-nuts in place while you screw/unscrew the bolts. It was four bolts on mine, though I've seen just two holding the servo in place on others. Also, remember that you have to unscrew the small allen bolt on the servo-motor-knob which holds it to the servo. |
|
| Back to top |
|
|
Zack_Attack
Addict
Joined: 08 Mar 2005
Posts: 767
City: Corbin, Kentucky
|
| Posted: May 19, 2006 4:05 pm Post subject: |
|
|
gotcha, thanks.
_________________
Holly Bay All The Way! |
|
| Back to top |
|
|
|
|
|
FAQ
Search
Memberlist
Stats
Favorites
Register
Profile
Log in to check your private messages
Log in
