| View previous topic :: View next topic |
| Author |
Message |
Zack_Attack Addict


Joined: 08 Mar 2005 Posts: 767 City: Corbin, Kentucky
|
Posted: May 02, 2006 7:07 am Post subject: P.P. has some problems |
|
|
I just took my boat out for the first time the other day and I couldn't get the perfect pass to function right, I just assumed it was me being inexperienced so I took it back out yesterday after reading the manual and stuff. My cousin, who does know about perfect pass, jumped on with inent to help me. We discovered however that the servo is seized up. Its so tight you can't even budge it. I didn't have any tools so I didn't get to put any REAL pressure on it. Has this happened to anyone before? its an 05 boat so should I be worried?
Also my swim deck moves up and down a little bit while in the water? Is that normal?
The boat is an 05 supra 21v. This is my first inboard so bare with me. Thanks. Later _________________ Holly Bay All The Way! |
|
| Back to top |
|
 |
|
|
vawakemonster Wakeboarder.Commie


Joined: 03 Sep 2004 Posts: 1285 City: fredericksburg
|
Posted: May 02, 2006 7:35 am Post subject: |
|
|
swim platform YES and some people tape or ubstruct in another way there wheel on the bottom to prevent it form burning out while driving out of the water, have you looked into that? _________________ R.I.P. M. Legge
| K-dub wrote: | | ......hell, even borrowing your mom's lotion and rubbing one out would be a good idea to pass some time. |
|
|
| Back to top |
|
 |
Zack_Attack Addict


Joined: 08 Mar 2005 Posts: 767 City: Corbin, Kentucky
|
Posted: May 02, 2006 7:43 am Post subject: |
|
|
well, I haven't pulled it anywhere except to the lake. now it sets in the slip so...
I am going to take a pair of pliers and see if I can break it loose. If that doesn't work do you think that it will be warrantied, there is only 160 hours on the boat and system. _________________ Holly Bay All The Way! |
|
| Back to top |
|
 |
Mackr0s Criminal


Joined: 14 Sep 2005 Posts: 84 City: Plano, TX
|
Posted: May 02, 2006 8:43 am Post subject: |
|
|
For the swim platform on my 21v.
I took the platform off, and in the bracket that holds the platform to the boat, I put in some felt strips I got from walmart for like $3.
You can see them in the bottom left of this picture. There are tan and long.
I put 1 and 1/2 stips in the bracket, and using a rubber mallet, pound the platform back into place. This completly stops the platform from shaking/moving or making any noise.
It makes it a bitch to take the platfrom on and off, but will make it be quiet. |
|
| Back to top |
|
 |
J_DOGG PityDaFool Who Posts This Much


Joined: 14 Jan 2003 Posts: 5088 City: New Hampshire
|
Posted: May 02, 2006 11:23 am Post subject: |
|
|
Is the engine on or off?
I'm not 100% sure but I think you can only turn the knob to reset the PP when the engine is off. Once you start it is goes through a self winding stage and sets it's self again.
I think my book said engine off, turn out 3/4 of the way and turn the boat back on, test PP and adjust again from there. _________________ PEACE
| Aubs wrote: | | J Dogg - I thought of you last night. |
"Everyone wants a bite, it don't happen over night"! |
|
| Back to top |
|
 |
Kewlboarder27r Soul Rider

Joined: 16 Jun 2005 Posts: 497 City: Mound
|
Posted: May 02, 2006 8:13 pm Post subject: |
|
|
My 05 24 SSV has a similar problem except it turns freely anyways the dealer has a new PP Servo motor on order. Yes the boat should be in the off position and then the PP should be wound out 3/4 of a turn and then turn the key to the on position. If it wind in then its another problem and if it dosent there may be a lose wire or the servo motor is bad. _________________ Supra owners join the group!
http://hs.facebook.com/group.php?gid=2262857465 |
|
| Back to top |
|
 |
WakeProdigy Criminal


Joined: 11 May 2003 Posts: 51 City: Dallas
|
Posted: May 03, 2006 3:43 pm Post subject: |
|
|
| I've had problems with my PP since day one. I basically got a faulty PP. The first thing that was replaced was the servo. That didn't work. Ended up replacing the whole PP electronics. Works better now. I've only had it on the water once since the replace. For the most part it would stay within +/- 1.5 mph of the set speed with KDW 220 and NN 65 (I think those were the settings) and about 2000# of ballast. However, a couple of times while pulling a rider the speed would drop from 22 to 14, and I would have to hand throttle to get back to speed. Has anyone else had this problem? |
|
| Back to top |
|
 |
WakeProdigy Criminal


Joined: 11 May 2003 Posts: 51 City: Dallas
|
Posted: May 03, 2006 3:50 pm Post subject: |
|
|
| I've had problems with my PP since day one. I basically got a faulty PP. The first thing that was replaced was the servo. That didn't work. Ended up replacing the whole PP electronics. Works better now. I've only had it on the water once since the replace. For the most part it would stay within +/- 1.5 mph of the set speed with KDW 220 and NN 65 (I think those were the settings) and about 2000# of ballast. However, a couple of times while pulling a rider the speed would drop from 22 to 14, and I would have to hand throttle to get back to speed. Has anyone else had this problem? |
|
| Back to top |
|
 |
Zack_Attack Addict


Joined: 08 Mar 2005 Posts: 767 City: Corbin, Kentucky
|
Posted: May 03, 2006 6:37 pm Post subject: |
|
|
well I am heading out tomorrow to "fool" with it. I am going to take some pliers or something and try to break that servo free.
I did try to turn it on and back off several times and each time it was winding but not moving. The motor was VERY hot on the servo, so that tells me that the motor IS working, but the servo is not catching.
Do you suppose the gears could have lost teeth on them or something? I don't know, but if I can't fix it I suppose I will just call the dealer and either take it over there or have him put an order in for a new servo motor. _________________ Holly Bay All The Way! |
|
| Back to top |
|
 |
Kewlboarder27r Soul Rider

Joined: 16 Jun 2005 Posts: 497 City: Mound
|
Posted: May 03, 2006 6:45 pm Post subject: |
|
|
just call the dealer have then order you a new servo motor and see if that cures it. My PP is totally dead though dosent work at all. _________________ Supra owners join the group!
http://hs.facebook.com/group.php?gid=2262857465 |
|
| Back to top |
|
 |
pilot_ryder Wakeboarder.Commie


Joined: 15 Sep 2005 Posts: 1296 City: edmonton
|
Posted: May 03, 2006 6:46 pm Post subject: |
|
|
its a super floating platform that lets you float on the water  |
|
| Back to top |
|
 |
DRAGON88 Ladies Man


Joined: 12 Jan 2003 Posts: 8213 City: Portland, OR
|
Posted: May 03, 2006 9:33 pm Post subject: |
|
|
pilot_ryder, For the love of god stop posting so much! It wouldn't be so bad if you would actually have something useful to add to the thread. Just because you click on a thread does not mean you need to reply. It's really annoying. _________________ wakeboards
wakeboarding |
|
| Back to top |
|
 |
Zack_Attack Addict


Joined: 08 Mar 2005 Posts: 767 City: Corbin, Kentucky
|
Posted: May 04, 2006 9:53 am Post subject: |
|
|
TWO BIG THUMBS UP for Perfect Pass. Man that is one awesome company. I just called, told them whats going on, and immediately they said "no problem, whats your adress and we will send you a new servo/motor" Just wanted to say that they are truly an awesome company to deal with. _________________ Holly Bay All The Way! |
|
| Back to top |
|
 |
gene3x Addict


Joined: 31 Aug 2004 Posts: 759 City: Dallas
|
Posted: May 04, 2006 5:14 pm Post subject: |
|
|
My 06 PP sucks! The new Throttle by wire systems have flaw that are not yet fixed.  _________________ My therapist says it is all your fault. |
|
| Back to top |
|
 |
gmarkham1 Addict


Joined: 10 Sep 2003 Posts: 505 City: janesville
|
Posted: May 05, 2006 5:04 am Post subject: |
|
|
my pp wasnt working well in speed mode when loaded down with factory ballast. speed mode worked well without weight and in rpm mode. IT would basically just blow right past the set speed, even though it indicated it engaged it never took over.
I did a system reset, set the kdw to 200 and the nn to 80, it worked much better after that.
2006 supra 21v _________________ www.midwestwakeboarder.com
Ride. Sleep. Repeat |
|
| Back to top |
|
 |
NAW Wakeboarder.com Freak

Joined: 13 Jan 2003 Posts: 4295 City: Chicago-ish
|
Posted: May 05, 2006 6:02 am Post subject: |
|
|
Get the KDW setting up there to 180-200 (this number can't be high enough) and the NN to 80-90.
Gene3x-It seems like it's been a long time that you have had this issue. I assume your boat is at your dealer now? If it's not, I would get it there and have them fix it. _________________ www.MidwestMilitia.net |
|
| Back to top |
|
 |
gene3x Addict


Joined: 31 Aug 2004 Posts: 759 City: Dallas
|
Posted: May 05, 2006 6:23 am Post subject: |
|
|
It is there getting many things fixed. They said there are about 2 out of every 10 boats that have the problem and that there is not definate fix. Just my Luck when you spend over $50,000 for a new toy. _________________ My therapist says it is all your fault. |
|
| Back to top |
|
 |
Mackr0s Criminal


Joined: 14 Sep 2005 Posts: 84 City: Plano, TX
|
Posted: May 05, 2006 6:51 am Post subject: |
|
|
I got lucky with mine. You have to baby the throttle right before it engages, but it works good.
2006 21v |
|
| Back to top |
|
 |
Zack_Attack Addict


Joined: 08 Mar 2005 Posts: 767 City: Corbin, Kentucky
|
Posted: May 05, 2006 7:26 am Post subject: |
|
|
HAHA Well, I "fooled" with it. More like I grabbed that sucker with a set of pliars and it busted into ten pieces (just the knob though). And yes, it did free it up, but it didn't make it work. Oh well, I am getting a new one so it doesn't really matter. Again though, Perfect Pass is awesome, the company and their people anyway. Absolutely great! _________________ Holly Bay All The Way! |
|
| Back to top |
|
 |
darty Addict


Joined: 18 Mar 2003 Posts: 522 City: Lexington
|
Posted: May 05, 2006 8:15 am Post subject: |
|
|
| glad things got worked out! |
|
| Back to top |
|
 |
Zack_Attack Addict


Joined: 08 Mar 2005 Posts: 767 City: Corbin, Kentucky
|
Posted: May 05, 2006 11:39 am Post subject: |
|
|
darty,
yeah, I was going to call you tonight and let ya know. Kyle and I are going to throw it on there next week. And I think that Leon is sending me a tower speaker. _________________ Holly Bay All The Way! |
|
| Back to top |
|
 |
|
|
|