| View previous topic :: View next topic |
| Author |
Message |
Matthew Edler Newbie

Joined: 09 Sep 2005 Posts: 39 City: St. Peters
|
Posted: May 03, 2006 6:57 am Post subject: Steering cable |
|
|
| Im getting ready to replace my teleflex steering cable in my 03 malibu 23 lsv and was wondering if there is any advice any one has to offer on this that maybe they learned the hard way or just something to make the job a little easier? I planned on pulling the old one out while pulling a rope in attached to it. |
|
| Back to top |
|
 |
|
|
acurtis_ttu Soul Rider

Joined: 16 Aug 2004 Posts: 499 City: Houston
|
Posted: May 03, 2006 11:23 am Post subject: |
|
|
Take it to your dealer/mechanic...it's a $250 job out the door Will only take the dealer a couple of hours.
But if you plan to do it yourself the rope idea works, but it's still a pain in the a_s. _________________ LED Concepts |
|
| Back to top |
|
 |
domslude Soul Rider

Joined: 25 Jul 2003 Posts: 479 City: Bakersfield
|
Posted: May 03, 2006 11:27 am Post subject: |
|
|
got mine done for free;) factory defect _________________ Go big or go home!
Why slam on the brakes, when you can slam on the gas!
Help me get a free ipod
http://www.freeiPods.com/?r=11591559 |
|
| Back to top |
|
 |
Bambamski Wakeboarder.com Freak

Joined: 03 Apr 2003 Posts: 4405 City: Calgary
|
Posted: May 03, 2006 12:06 pm Post subject: |
|
|
I tried to switch it out on my old X-10. I agree, huge pain in tha ass.
If it's anywhere as retarded as MC, the cable runs under the tranny, under the gas tank and up into the bow and over to the steering column.
When I realized I had to take the floor peice off and raise the gas tank I quit and took it to the dealer.
That's one of the those jobs I'd spend the cash and have the dealer do it ever time. |
|
| Back to top |
|
 |
Matthew Edler Newbie

Joined: 09 Sep 2005 Posts: 39 City: St. Peters
|
Posted: May 05, 2006 3:55 am Post subject: |
|
|
| Well, the steering cable install was a success. For those who challenge this repair yourself this may help. On the steering cable there is a nut that is used to fasten it to the adjuster at the rudder box, this nut will not pull through the boat with out getting hung up, so I took a old funnel and cut it down to slide over the end of the cable and over the nut to make it all smooth. Then when pulling the old cable out I had tied a pull string in behind it that was then used to help pull the new one back in. If necesary you may also want to use a silicon spray to help the process since the cable will want to hold on to every thing it rubs against. Good Luck, hopefully this helps you guys who like to save your money. Job took me 2 hours start to finish. Dealer wanted $250.00 in labor. |
|
| Back to top |
|
 |
CDawg Outlaw


Joined: 29 Jul 2005 Posts: 130 City: Bellevue
|
Posted: May 05, 2006 7:57 am Post subject: |
|
|
| Those sound like good tips, thanks for sharing. |
|
| Back to top |
|
 |
|
|
|