Wakeboarder Forum Index

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   StatisticsStats   FavoritesFavorites   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages  Log inLog in 
BlogsBlogs   

Wedge/'s for sterndrive?

 
Post new topic   Reply to topic    Wakeboarder Forum Index -> Wakeboard Boat General Discussion
View previous topic :: View next topic  
Author Message
Darin
Guest





PostPosted: Apr 02, 2006 7:00 pm    Post subject: Wedge/'s for sterndrive? Reply with quote

Is there a pair of wedges made for a strern drive? I'm assuming you have have to use a pair. I did a search on the WBforum and found 890 maches putting in 'wedge sterndrive' in the search field. I don't mind using the search tool, but I'm not sure I'm using it right by getting hits on both wedges and sterndives.
Back to top
DRAGON88
Ladies Man
Ladies Man


Joined: 12 Jan 2003
Posts: 8213
City: Portland, OR

PostPosted: Apr 02, 2006 8:04 pm    Post subject: Reply with quote

When you search select "Search for ALL terms."

I have not heard of such a device, the hulls on Malibu's are specifically reinforced to take that kind of stress...

Also, I/O's tend to like the weight in the bow, just trim up the motor a bit and throw a couple sacs in the bow. I don't think you really will be replacing any sacs by adding dual wedges... Honestly I'm not sure that the transom would be up to the task anyhow.

Just my 2 cents.

_________________
wakeboards
wakeboarding
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Hollywood
PityDaFool Who Posts This Much
PityDaFool Who Posts This Much


Joined: 01 Oct 2003
Posts: 5601
City: Door Knob

PostPosted: Apr 02, 2006 8:05 pm    Post subject: Reply with quote

you have to use "and" to boolean both words for the searc. Your way searches wedge and sterndrive separately. I did your search the correct way and only came up with this thread. Keep trying other words.
_________________
dizzlestoy wrote:
Dumb question... What is "Bubb Rubbing" I googled it and wakeboarder.com came up.
Back to top
View user's profile Send private message Send e-mail
krbaugh
Addict
Addict


Joined: 24 Jan 2003
Posts: 758
City: Edwardsville

PostPosted: Apr 02, 2006 8:38 pm    Post subject: Reply with quote

Do you mean a wedge or trim tabs.
I would think driving a boat with to wedge devices would be shall we say interesting Shocked
Back to top
View user's profile Send private message Send e-mail AIM Address
QNev
Wakeboarder.com Freak
Wakeboarder.com Freak


Joined: 13 Aug 2005
Posts: 2707
City: Kamloops, BC

PostPosted: Apr 02, 2006 9:19 pm    Post subject: Reply with quote

Just get trim tabs and trim up a little.
_________________
Quote:
Procrastination is like masturbation: Fun until you realize you're f***ing yourself
Back to top
View user's profile Send private message Visit poster's website
krbaugh
Addict
Addict


Joined: 24 Jan 2003
Posts: 758
City: Edwardsville

PostPosted: Apr 02, 2006 9:27 pm    Post subject: Reply with quote

"Just get trim tabs" Why would he want to make the wake smaller?
Back to top
View user's profile Send private message Send e-mail AIM Address
QNev
Wakeboarder.com Freak
Wakeboarder.com Freak


Joined: 13 Aug 2005
Posts: 2707
City: Kamloops, BC

PostPosted: Apr 02, 2006 9:30 pm    Post subject: Reply with quote

krbaugh, If you trim up, it will cause the boat to plough...Well not completely, but the bow of a stern drive is supposed to help more with the wake (hence the 60-40 front to back weight dist.)
_________________
Quote:
Procrastination is like masturbation: Fun until you realize you're f***ing yourself
Back to top
View user's profile Send private message Visit poster's website
krbaugh
Addict
Addict


Joined: 24 Jan 2003
Posts: 758
City: Edwardsville

PostPosted: Apr 02, 2006 9:32 pm    Post subject: Reply with quote

Ok what does that have to do with trim tabs?
Back to top
View user's profile Send private message Send e-mail AIM Address
QNev
Wakeboarder.com Freak
Wakeboarder.com Freak


Joined: 13 Aug 2005
Posts: 2707
City: Kamloops, BC

PostPosted: Apr 02, 2006 9:41 pm    Post subject: Reply with quote

krbaugh, they'll put more emphasis on the trimming's "plough" effect if that makes any sense.
_________________
Quote:
Procrastination is like masturbation: Fun until you realize you're f***ing yourself
Back to top
View user's profile Send private message Visit poster's website
krbaugh
Addict
Addict


Joined: 24 Jan 2003
Posts: 758
City: Edwardsville

PostPosted: Apr 02, 2006 9:46 pm    Post subject: Reply with quote

Trim Tabs will push the bow of the boat down, trimming the lower unit up will raise the bow of the boat. Not sure how doing both is going to help Question

http://www.bennetttrimtabs.com/tabsdo.htm
Back to top
View user's profile Send private message Send e-mail AIM Address
Hollywood
PityDaFool Who Posts This Much
PityDaFool Who Posts This Much


Joined: 01 Oct 2003
Posts: 5601
City: Door Knob

PostPosted: Apr 02, 2006 11:05 pm    Post subject: Reply with quote

Trim tabs will only help you "plough" less not more.
_________________
dizzlestoy wrote:
Dumb question... What is "Bubb Rubbing" I googled it and wakeboarder.com came up.
Back to top
View user's profile Send private message Send e-mail
boarditup
Addict
Addict


Joined: 01 Dec 2003
Posts: 731
City: Allendale, MI

PostPosted: Apr 03, 2006 10:04 am    Post subject: IO's Reply with quote

Get a foil on your ventilation plate. Atwood makes a good, inexpensive one. It makes the boat easier to trim. Then, get a 4 or 5 blade prop 2" less pitch than stock. Finally, get a few 300 lbs ballast bags and experiment with them in terms of placement. You can use sandbags in a pinch until you know how much weight you need where, but the sandbags can take your boat down to the bottom if swamped. Water ballast bags won't sink you - much safer. Go slow and easy with the extra weight - your boat will handle much differently.

This approach will give you the best wake for the cash.

_________________
Original Boarder from 1983

www.boarditup.com
www.placidwaters.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
karkid
Soul Rider
Soul Rider


Joined: 10 Sep 2004
Posts: 327
City: Tempe

PostPosted: Apr 03, 2006 9:47 pm    Post subject: Reply with quote

the company who made the switchblade for centurion is pretty close to me in decatur illinois. when i talked to the rep he said that they were planning on making a switchblade that would work with an i/o
Back to top
View user's profile Send private message
Wakebrad
Ladies Man
Ladies Man


Joined: 11 Dec 2003
Posts: 12257
City: Dallas

PostPosted: Apr 04, 2006 6:36 am    Post subject: Reply with quote

You don't need a wedge on an i/o. Trimming your motor up does the same thing. If you want more force going downwards get a foil for you outdrive like boarditup suggested.
_________________
You have just entered the twilight zone.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Ruune
Wakeboarder.Commie
Wakeboarder.Commie


Joined: 19 Oct 2003
Posts: 1809
City: San Antonio & Austin, TX

PostPosted: Apr 07, 2006 11:06 am    Post subject: Reply with quote

like this...

http://www.overtons.com/modperl/overtons/detail/pdetail2.cgi?r=detail_view&item_num=23319

_________________
I eat Vegans. Medium-Rare.
American by birth, TEXAN by the grace of God.
Dyslexics of America UNTIE!!!
www.360wakeboard.com
www.texaswakeboarders.com
Back to top
View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger
Darin
Guest





PostPosted: Apr 14, 2006 10:15 pm    Post subject: Reply with quote

I have a hydrofoil thing, 600lbs sac, that I've put in the back fo the boat, but I will move it to the front this year. I do trim up. Or at least try to get my wife to.
Back to top
QNev
Wakeboarder.com Freak
Wakeboarder.com Freak


Joined: 13 Aug 2005
Posts: 2707
City: Kamloops, BC

PostPosted: Apr 14, 2006 11:09 pm    Post subject: Reply with quote

Ruune, that's what I meant Razz ... Rolling Eyes
_________________
Quote:
Procrastination is like masturbation: Fun until you realize you're f***ing yourself
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Wakeboarder Forum Index -> Wakeboard Boat General Discussion All times are GMT - 8 Hours
Page 1 of 1

Add To Favorites

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
             


Copyright © 2012 - Wakeboarding - Wakeboarder.com - All Right Reserved
Powered by phpBB © 2001, 2005 phpBB Group