| View previous topic :: View next topic |
| Author |
Message |
kevthayer Outlaw


Joined: 12 Sep 2005 Posts: 231 City: Benicia
|
Posted: Apr 04, 2006 10:12 am Post subject: Is there a special sparkplug socket for boats? |
|
|
| This past weekend I did a tune up on my Mercruiser 5.7L engine. Everything was going great until it ame time to change my spark plugs. I broke three of the old ones while taking them out and snapped two new ones when putting then back in. I was using a standard automotive sparkplug socket and the hexagonal shape was hitting my exhaust mainfold. Each time I turned tihe socket I could see the tension on the plug. I figure there is a special thinner walled sparkplug socket out there specifically designed for this right? I know that any one should be able to change the plugs and the manifold has grooves in it to get a wrench in there, the grooves just arent big enough. Anyone heard of a solution to this problem? |
|
| Back to top |
|
 |
|
|
Loppy Outlaw

Joined: 01 Dec 2005 Posts: 238 City: Fair Oaks, Nor Cal
|
Posted: Apr 04, 2006 11:18 am Post subject: |
|
|
There should be no difference between automotive and aquatic engines. The heads should be the same.
I suggest making a quick call to your boat mfg's local shop and ask them what they use. I'm sure it's just some thinner wall, shorter socket that works best with that motor. Prolly by brand X at X auto parts or whatever...
Got a bench grinder? I've ground down many to fit my different motorcycles better. _________________ My beer drinking friends have a wake boarding problem. |
|
| Back to top |
|
 |
kevthayer Outlaw


Joined: 12 Sep 2005 Posts: 231 City: Benicia
|
Posted: Apr 04, 2006 12:27 pm Post subject: |
|
|
| Oh yes the bench grinder. I called my local shop and they said they would have to take a look at it to understand the problem. I found it hard to believe that they had never heard of anyone having a problem with the socket rubbing on the manifold. |
|
| Back to top |
|
 |
Ghost Newbie

Joined: 03 Apr 2006 Posts: 9
|
Posted: Apr 04, 2006 12:43 pm Post subject: |
|
|
| kevthayer, Your socket is probably too big. Just get a thin walled socket for plugs at xxxxx store. I have 3 of them. The do help a bunch. |
|
| Back to top |
|
 |
Loppy Outlaw

Joined: 01 Dec 2005 Posts: 238 City: Fair Oaks, Nor Cal
|
Posted: Apr 04, 2006 12:55 pm Post subject: |
|
|
Are you using a standard "Spark Plug socket wrench"? I mean one specifically designed for spark plugs?
If so, it prolly has the rubber "keeper" plug in it right? Does it also have a super thick collar on the drive end and is hex shaped for an open end wrench as well? 6 point socket?
that can all cause problems. I've found that finding the right size, standard non-"spark plug" 12 point deep point thin walled socket works best in tight places. The better quality tools will usually have thinner walls. Avoid the Kragen Chineese chit, the metal sucks so they make them thick.
A thin walled 12 point (not 6 point, they are thicker) deep socket of good quality should do the job. You can gain even more clearance by measuring with a plug, and throw it in a chop saw and cut off any excess you dont need.
That should work for ya.  _________________ My beer drinking friends have a wake boarding problem. |
|
| Back to top |
|
 |
kevthayer Outlaw


Joined: 12 Sep 2005 Posts: 231 City: Benicia
|
Posted: Apr 05, 2006 7:25 am Post subject: |
|
|
| Yeah I was using the standard. Then I used my 6point regular deep well socket and busted antoher one. So I decided to get some ideas from everyone. Thanks for the tips. |
|
| Back to top |
|
 |
410fortune Soul Rider

Joined: 24 Jun 2005 Posts: 314 City: Morrison
|
Posted: Apr 05, 2006 10:47 am Post subject: |
|
|
I had this same issue on my 4.3L, the plugs come out of the head straght and the water jackets for the exhaust manifold (big iron piece) was right there hitting the socket when you would get to the last few threads.
I took a bench grinder to my Craftsman sprak plug socket (3/8" drive) around the back edge, problem gone.
A hand held spark plug wrench would have been VERY handy for working on this engine. They are shaped like a T at the handle, then have a U joint inthe middle and a spark plug scoket built into the end.....
but the bench grinder got me so where the other 5 plugs were a snap (aside from being upside down and backwards in the engine compartment) |
|
| Back to top |
|
 |
|
|
|