| View previous topic :: View next topic |
| Author |
Message |
DJew Jake Wakeboarder.com Freak


Joined: 17 Sep 2003 Posts: 3907 City: Toronto
|
Posted: Aug 27, 2008 4:14 pm Post subject: 2002 super air, under driver seat kick plate question |
|
|
Hi, on my 2002 super air, i have the kick plate under the driver console that holds the speaker, fusebox and heaters, from being screwed and unscrewed over and over to winterize the heater core, the fiber glass behind it that it screws into has become swiss cheese and it has nothing to hold it up.
Would it be hard to reglass that little hump behind the plate to have it screw in nicely? Does anyone else have this problem or any solutions? That one area of my boat makes me laugh because compared to the rest of the construction it seems like a last minute solution by the company. _________________ They know what is what but they dono what is what they just strut. |
|
| Back to top |
|
 |
|
|
DRAGON88 Ladies Man


Joined: 12 Jan 2003 Posts: 8213 City: Portland, OR
|
Posted: Aug 27, 2008 5:22 pm Post subject: |
|
|
Totally unnecessary to remove to winterize, but yes, you should be able to fill and re glass that stupid foam wedge no problem.
I agree, but none of the other companies really have much better solutions. Honestly the CC is the best mounting system I've come across believe it or not...
In the future pull the hoses at the engine and blow them out, or better yet splice in some quick connects or couplers, it makes winterizing a bit easier... _________________ wakeboards
wakeboarding |
|
| Back to top |
|
 |
DJew Jake Wakeboarder.com Freak


Joined: 17 Sep 2003 Posts: 3907 City: Toronto
|
Posted: Aug 27, 2008 8:02 pm Post subject: |
|
|
Just in the past the marina we take it to has cracked the heater core, they said the only way to get the anti freeze in it was to access it directly. _________________ They know what is what but they dono what is what they just strut. |
|
| Back to top |
|
 |
DRAGON88 Ladies Man


Joined: 12 Jan 2003 Posts: 8213 City: Portland, OR
|
Posted: Aug 27, 2008 8:11 pm Post subject: |
|
|
uh, or you know, disconnect the hoses and poor antifreeze through it until it comes out the other end...
Just sayin'... _________________ wakeboards
wakeboarding |
|
| Back to top |
|
 |
Brit Rider Wakeboarder.com Freak


Joined: 29 Mar 2004 Posts: 3347 City: Cheshire, England
|
Posted: Aug 28, 2008 7:33 am Post subject: |
|
|
DRAGON88, seconded... That's all we do and we distribute those Heaters (Heatercraft) here in the UK.
Jibsta, Pull the lines from your water pump and intake manifold (you can identify them as they'll say 'Heater Hose 19mm' on them) and then stick a funnel in one end of the pipe and pour a few litres of antifreeze through (holding it up high!) until it comes out the other end... once this has happened you can either hook it back up to the engine (pending the engine being winterised already) or leave them unhooked ready to plug back in come spring time.
Big question though - why you winterising already?!  _________________ www.AxisBoats.co.uk | www.Malibu-Boats.co.uk |
|
| Back to top |
|
 |
Red57Bird Soul Rider

Joined: 09 Aug 2005 Posts: 316 City: Raleigh
|
Posted: Aug 28, 2008 7:48 am Post subject: |
|
|
Here is a link from a Planetnautique thread about the kick panel. Not sure you want to go to these same lengths and replace the hump, but that is an option. Like others have said, use air to blow out the water left in the heater core and simply fill up with the non-toxic antifreeze. A friend has a heater in his 03 SAN and he has had no issues with the core cracking.
http://planetnautique.com/index.php?name=PNphpBB2&file=viewtopic&t=1271&highlight=heater+fiberglass _________________
| letsgo19 wrote: | Can someone tell that guy that in a chop water breaks at varying locations on hull da and that they didn't invent the boat!wow the arrogance of that!!!!!  |
|
|
| Back to top |
|
 |
DJew Jake Wakeboarder.com Freak


Joined: 17 Sep 2003 Posts: 3907 City: Toronto
|
Posted: Aug 28, 2008 1:45 pm Post subject: |
|
|
Winterising because me and the bro are off Leaving town for a few months, nobody going to be around to use the boat, so might aswell get it done. _________________ They know what is what but they dono what is what they just strut. |
|
| Back to top |
|
 |
JUST-IN-TIME Soul Rider

Joined: 24 Dec 2007 Posts: 356 City: ON YOUR BOAT
|
Posted: Aug 28, 2008 4:29 pm Post subject: |
|
|
if u pull the hoses off the motor side and stick them low in the blige, it will drain
then blow air in the top hose
works all the time _________________ HUMAN BUILT = HUMAN FIXED
CERTIFIED MARINE/PWC TECHNICIAN
www.switchbait.com |
|
| Back to top |
|
 |
DJew Jake Wakeboarder.com Freak


Joined: 17 Sep 2003 Posts: 3907 City: Toronto
|
Posted: Aug 28, 2008 4:44 pm Post subject: |
|
|
Thanks for alll the advice, i will winterize by blowing, then filling with AF, and Next spring i will reglass the kickplate hump _________________ They know what is what but they dono what is what they just strut. |
|
| Back to top |
|
 |
JUST-IN-TIME Soul Rider

Joined: 24 Dec 2007 Posts: 356 City: ON YOUR BOAT
|
Posted: Aug 28, 2008 4:51 pm Post subject: |
|
|
if u raise one hose higher then the core, it will get in there
use the bio AF stuff please _________________ HUMAN BUILT = HUMAN FIXED
CERTIFIED MARINE/PWC TECHNICIAN
www.switchbait.com |
|
| Back to top |
|
 |
|
|
|