Fly High Pro-X fat sacs

[Nauty]

Question....

Can a standard fat sac pump (using the blue waterbed adapter) be used with the new Fly High Pro-X fat sacs or do you HAVE to use Fly High's Tsunami pump?

I have some Fly High sacs that came stock in my Supra SSV. They have the threaded valve holes just like the new Pro-X sacs. I am selling my stock sacs to a friend and am buying the 400 lb Fly High Pro-X V-drive sacs to replace them.

The problem is that the friend who is buying my stock sacs needs to be able to fill them up using a standard fat sac pump with the blue waterbed adapter. Being that these stock sacs have a threaded valve, I need to add some type of fitting that will accomodate his pump. It looks like I can take the fittings that will come with the Pro-X sacs and put them on the stock sacs that I am selling. However, I still have the problem of getting a standard pump to work with these fittings.

I went on Fly High's website (Barefoot International) and it does appear as though they make a fitting that will adapt to a standard pump. providing the threads are the same. The problem is, I cannot find a dealer who sells this fitting. I will call Fly High tomorrow when they are open, but I thought I'd see if anyone else has come across this before and if any of you have a solution.

Thanks

[Sbt3]

The Tsunami is a standard bildge pump made by Attwood, most of the boat supply stores can get. I would think that the threads on the pump are the same as all the other pumps. Fly high will have a fitting that will work with it. The fly high number for the fitting is W734. You should be able to order it direct through BFI, but your dealer should be able to get it.