| View previous topic :: View next topic |
| Author |
Message |
Ladythump Soul Rider


Joined: 21 Jul 2004 Posts: 300 City: Lake St. Louis
|
Posted: Jan 26, 2005 10:03 am Post subject: stereo receiver questions -- |
|
|
here are my two choices:
Boss MR1200S $90
subwoofer output (bass max)
dual rca outputs
50w x 4 channel
built in amp
vs.
Clarion XMD1 (refurbished) $100
45w x 4 channel
4 channel line level output
4 channel speaker level output
front/rear preamp outputs (2 sets)
rms power output: 16w x 4
I was also interested in this amplifier to power the receiver and a sub...
Blaupunkt PA2150 $90
150 watts x 2 @ 4 ohms
200 watts x 2 @ 2 ohms
variable high/low pass crossovers
preamp outputs
I don't need a system to rock the whole lake, just want something decent. Would I need one or two amps?
I also want a receiver that will handle some wave action on the water and not be skipping all the time.
Thanks for the help guys. _________________ Life is a series of ups and downs, separated by no-wake signs. |
|
| Back to top |
|
 |
|
|
882001 Soul Rider

Joined: 27 Nov 2003 Posts: 418 City: clear lake, texas
|
|
| Back to top |
|
 |
Ladythump Soul Rider


Joined: 21 Jul 2004 Posts: 300 City: Lake St. Louis
|
Posted: Jan 26, 2005 11:36 am Post subject: |
|
|
Thanks dude....so helpful.
 _________________ Life is a series of ups and downs, separated by no-wake signs. |
|
| Back to top |
|
 |
Ladythump Soul Rider


Joined: 21 Jul 2004 Posts: 300 City: Lake St. Louis
|
Posted: Jan 26, 2005 11:44 am Post subject: |
|
|
I would like to use some of the existing equipment I already have. here is the amp and the speakers already in the boat. As far as I can tell, the amp is only hooked up to the sub.
Pioneer GM3000T power amplifier offers big sound in a small package, measuring only 6-1/8 inches wide.
Offers 1, 2, and 3-channel operation (including a bridged 100W x 1 into 4 ohms), plus a Hi-Volt Input Level Control (400mV ~ 6.5V) and a Selectable Low-Pass Filter for added control and flexibility.
GM-3000T features a pulse width modulation (PWM) circuit that efficiently outputs only the lower frequencies - perfect for powering a sub.
Oversized screw-type power/ground terminals and RCA inputs are provided with the GM3000T, and the 2-channel speaker level input offers added control.
Peak Music Power: 200 Watts.
Number of Channels: 2.
Load Impedance Capability: 2- 8 Ohm (Stereo), 4-8 Ohm (Bridged).
Continuous Power (4 ohm): 40W x 2.
Continuous Power (2 ohm): 50W x 2.
Continuous Power Bridged (4 ohm): 100W x 1.
Frequency Response: 10Hz ~ 45kHz.
Total Harmonic Distortion: 0.008%.
Signal-to-Noise Ratio: 100dB.
Dimensions: 12" x 2-3/8" x 6-1/8".
Bridgeable.
Channel # Capability: 1/2/3.
PWM Regulated MOSFET Power Supply.
Screw-Type Speaker Terminals.
Balanced Isolator Input Circuit.
RCA Inputs: 2 Channel.
Speaker Level Input: 2 Channel.
Input Level Control: Hi-Volt (400mV - 6.5V).
Built-in Crossover: Selectable LPF (80Hz, -12dB/Oct.).
Pioneer TS-G1647
PET silver film cone tweeter
foamed injection-molded poly woofer
fits 6-1/2" and 6-3/4" openings
frequency response 35-22,000 Hz
recommended power range 2-30 watts RMS
peak power handling 150 watts
sensitivity 92 dB _________________ Life is a series of ups and downs, separated by no-wake signs. |
|
| Back to top |
|
 |
Swass Guest
|
Posted: Jan 26, 2005 12:08 pm Post subject: |
|
|
I know you said you don't wanna "rock the lake," but I don't think you'll be happy with the volume of the speakers if you rely on the head unit for power. An RMS rating of 16w is generous, to say the least.
If you elect to go with one of the head units that you listed, I'd recommend an amp to power them in addition to the amp for the sub. My guess is the sub is overpowering the highs and mids in your current setup (you have 3x the power running to your sub as you do to your four speakers). If you don't want to spend too much, I'd be inclined to recommend a speaker upgrade in lieu of the second amp for now. Check out etronics.com. |
|
| Back to top |
|
 |
kavlock99 Wakeboarder.Commie


Joined: 06 Feb 2004 Posts: 1214 City: St. Louis
|
Posted: Jan 26, 2005 12:10 pm Post subject: |
|
|
Personally i'd go for the refurb'd Clarion. That looks like a high quality receiver.
Go with your plan with the Pioneer amp for your sub.( Not sure what you are using, But get a sub that will drop your amp load to a 2 ohm load on mono for some extra wattage: that is if its capable.)
Use the deck wattage for your speakers. Unless you get the extra amp, and then wire the speakers to that. Like Swass said, the amp for the speakers will make a great improvement in clarity and overall sound. good luck _________________ (0OO \ (||||)(||||) / OO0) |
|
| Back to top |
|
 |
lumpy Criminal

Joined: 25 Jul 2003 Posts: 99
|
Posted: Jan 27, 2005 4:38 am Post subject: |
|
|
With a little research you can usually find some real good deals on some used head units. As a general rule you can find very high quality units for under $100. The research comes into play with finding those $400-600 head units from 4-7 years ago. These units typicaly have 3 outputs, one base specific and very good anti-skip tendacies. I have had much better luck also with quality and durability by using Alpine and Eclipse, not to mention sound. As a general rule also the higher priced units have been better taken care of, same with boats and cars. e-Bay provides a excellent selection and again with careful shopping you can get a very good unit and a very good price. _________________ What will you do with this man Jesus? |
|
| Back to top |
|
 |
|
|
|