Posted: Jan 10, 2005 1:04 am Post subject: floor epair question on SN 2001?
I was wonering if anyone can give me some advice? here's what i have.
tore out the carpet tonight to check out my floor. along the back side of the boat i noticed on the 2 sides of the floor there are cracks from the engine almost all the way to the back of the boat. these cracks are where the floor does a 90 deg. angle and drops down near the exhaust.
wood does not appear wet, and there are no weak spots anywhere when i walk. Can i just cut out a inch on each side and sand and clean the coating that covers the wood and then fill in the area i cut out over the wood with fiberglass and over lap onto the coating a inch? Another question i have is it appears that fiberglass was used as a floor covering in front of the boat , and a coating was used behind the engine and not fiberglass there. my concern is that fiberglass might not bond to the coating or am i wrong? maybe the fiberglass bonds to the resin that you lay before putting the fiberglass down and for this reason you would want to build the resin up before lying the mat of fiberglass . T hanks for reading. please answer with your thoughts. i dont want to cut corners or replace floor later.
ummmm cracks in the floor sounds like you should consult a dealer, or at least post pics so the knowledgable people here won't have to guess at what it could be. _________________ TEAM PIRATE, AAAARRRGGGHHH YOU READY?
Oh Im sorry, did I break your concentration?? Oh you were finished...well allow me to retort!!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum