Posted: Jan 19, 2005 6:13 pm Post subject: Where is the trim sending unit for the trim gauge?
I have a 3.0 liter merc in my VIP boat. When I trim all the way down the trim gauge only shows 3/4 of the way down.
The trim does work correctly. I read that you can adjust the trim sending unit that tells the trim gauge what to show but I dont know where this is or what it looks like.
i thought it was the right black round cap on the sterndrive..
eitherway one is for the meter and the other stops the drive to come all the way up into trailer position.
The trim sender on my mates sterndrive is on the inside of the fixed bracket which mounts the sterndrive to the transom. It is only accesable when the sterndrive is trimmed fully up/out and is in near the pivot point. You can easily move it by hand when the sterndrive is trimmed out. It is made of plastic and is spring loaded.
Hope this helps
Andrew _________________ Wakeboarding is so Kool in Ireland!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum