Exo's

wakeriderof87 · Posted: Mar 17, 2003 7:58 am Post subject: Exo's

I bought some new exo's this weekend and i went out yesterday and i couldn't get out of them in the water at all, i had to climb up in the boat stand up and have somebody stand on the board while i leaned forward and pulled, anytips for how i could get out

J-Dub · Soul Rider Joined: 26 Feb 2003 Posts: 321 City: Atlanta

Lube those beast up when you get out. I heard that they lock up in cooler water.

wakeriderof87 · Posted: Mar 17, 2003 8:03 am Post subject:

yea the water wasn't cold at all, but its a pain to get out of the water with them on, i could get my old ones off in the water

seedickride · Criminal Joined: 12 Jan 2003 Posts: 97 City: Munich, ND

I'm not sure if I can explain this clearly or not, but here's a suggestion for you- take the overlay straps with the fairly good sized holes in it (for adjustment purposes) that wraps around the front of your leg out from under the rear white plastic pieces and put them under the front white plastic holddown pieces. You will have to remove them from the slotted holes that they currently go through to let them line up with where you will be attaching them. When you do this, it will give you some extra rubber, so they will have to be tightened up one or two holes tighter than where they were attached earlier. This will make it easier to get in and out of the bindings, and they will be more comfortable. They actually will fit more like the Ultra Suctions. We've had good success with this method. Let me know if I wasn't clear enough on the instructions. To remove the white plastic holddowns, you'll need a phillips screwdriver, and the screws can be found on the underside of the binding plate.

wakeriderof87 · Posted: Mar 17, 2003 12:43 pm Post subject:

i'll try that, only thing is i didn't like the ultras as much, but i'll still try it thanks for the tip, but yea it was plenty clear

SKATEwakeBOARDER · Criminal Joined: 06 Feb 2003 Posts: 96 City: Jackson GA

Just take em apart and loosen em. Just like any bindings you have to break em in. I used to not be able to get mine on while in the water but now they are fine.

wakeriderof87 · Posted: Mar 17, 2003 2:46 pm Post subject:

thanks skate, thats what I was plannin on doin, but they are almost as loose as they go now

STPHNSN23 · Guest

u just have to get them fit correctly and break them in