Ultras Question - Please Help

_Vishnook_ · Outlaw Joined: 20 Feb 2004 Posts: 182 City: Wauwatosa

Hola Senores,

I have a pair of 2002 Liquid Force Ultra Suction Bindings. They are a size large. I always seem to have trouble putting them on. Thats why I have some Nice PRS1s as well. I wear anywhere from a size 11 to a 12. I don't know what to do with the ultras. I think I am going to attempt to adjust the overlays. Is there anything that I should know before attempting this? Do adjusting the overlays do anything? Is there any really good way to help get them on easily? The Ultras are a size Large. Any help would be a blessing.

Wakebrad · Ladies Man Joined: 11 Dec 2003 Posts: 12257 City: Dallas

First of all use some sort of binding lube. The stuff from the store, dish soap, shaving creame, KY Jelly. That should help the most. You can adjust the overlays pretty easily. Take the bindings off the board and on each side there are 3 screws that you need to unscrew. Lift the white part on the top and move a notch down. Then put the white part with the overlay and stretch it down to the notches. Screw them back in and you're golden. With that and binding lube I don't have much of a problem getting in to my ultras.

BoardinDan · Posted: Jun 08, 2004 5:05 pm Post subject:

yeah same here i get in to mine easy with lube
the front over lays are easy to adjust, its the backs that are a pain in the a$$

_Vishnook_ · Outlaw Joined: 20 Feb 2004 Posts: 182 City: Wauwatosa

Thanks for the advice, Im going to attempt the feat tomorrow or so.

Jane · Criminal Joined: 25 Sep 2003 Posts: 84 City: NL

I've ultra's myself and I use vaseline (yeah really) to get in combined with dishsoap... works excellent... don't forget to wash out the dishsoap before starting...