How are the hyperlite boards on sliders?

BiGaIrNaUtIqUe · Criminal Joined: 07 Mar 2004 Posts: 85

How are the 04 hyperlite boards, like the parks and the Temet, on sliders? Since there is like a hump going down the center for soft landings, does that make you slide off of a 50-50?

j-mo-pel is key · Outlaw Joined: 13 Jan 2003 Posts: 139 City: minnesota

i wouldn't slide a brand new hype if i were you, use an old messed up board

Bill Y Bob · Posted: Mar 15, 2004 3:58 pm Post subject:

Who cares if you use a new hyperlite on sliders?
After all, they should change their name to Hypercrap Twisted Evil

Maestro · Posted: Mar 15, 2004 4:01 pm Post subject:

The center beam will not make you fall out of 50-50s unless you can't do them anyways. And not all the boards have them - just a few.

x2hoss · Criminal Joined: 09 Sep 2003 Posts: 75

My 04 parks scratches the same as my liquid force Very Happy

CHiLi DaWg · Posted: Mar 15, 2004 4:46 pm Post subject:

New board or not, if you get a chance to slide it, take it!

Inggy · Posted: Mar 15, 2004 4:59 pm Post subject:

Bill Y Bob, that was original!!! Rolling Eyes

BiGaIrNaUtIqUe · Criminal Joined: 07 Mar 2004 Posts: 85

Its the rave blow up sliders, so I doubt that it would mess it up too much. Neutral

hopefully

wakebored · Posted: Mar 16, 2004 11:32 am Post subject:

The boards slide fine. You won't even notice the center beam.

New or used, its a freakin wakeboard, slide everything you see.

03Belmont · Wakeboarder.com Freak Joined: 19 Aug 2003 Posts: 4656

My 03 belmont slides better than my LF... fo some reason I kept slipping out when I was slidn on my LF

Wake_Turner · Outlaw Joined: 28 Feb 2004 Posts: 244 City: kelowna

HIT IT..... if there is a slider and u are good enough to take it then do it. I have a hyperlite premeir 135. i slide it lots. ya there are some scrathes but whoopty whoop it's no big deal all it does is make u look better haha. it in no way changes the ride or feel of the board. BALLS TO THE WALL bo, go for it

CHiLi DaWg · Posted: Mar 16, 2004 2:18 pm Post subject:

BiGaIrNaUtIqUe, I've done the rave slisers before with my 02 premier. It just left some black marks on the bottom. I think they will rub off if you want to get rid of them. Not a big deal.