| View previous topic :: View next topic |
| Author |
Message |
mcgunit Newbie

Joined: 08 Mar 2004 Posts: 1 City: Grafton
|
Posted: Mar 08, 2004 8:03 pm Post subject: Ballast (use of Fat Boys) in Stern Drive Boat |
|
|
Good evening all,
Since I can only wakeboard about 4-5 months a year and require a boat that can handle some bigger waters, we wakeboard behind a sterndrive Sea Ray 200BR with Bravo III drive. We are beginners/intermediate and are actually quite satisfied.
I'm considering adding some Fat Boys to enhance our wake...the question is where?? Not much room in the engine compartment, which leaves us with a storage area under a bench seat just in front of the engine OR the ski locker in the center of the boat. What's the best spot ? Any experience with this or recommendations ?
Thanks in advance for your help and advice !!!!!!!
Chris _________________ I ain't playin' the hand I was dealt, I changed my cards. |
|
| Back to top |
|
 |
|
|
MrBlean Wakeboarder.Commie


Joined: 09 Mar 2003 Posts: 1420 City: UK
|
Posted: Mar 09, 2004 10:03 am Post subject: Who's a Fat Boy? |
|
|
Change the Fat Boys for fat sacs - they'll complain less about the cramped conditions in the ski locker.
You are just trying to sink the boat a bit reasonably uniformly. Not being familiar with the layout of your boat, the ski locker sounds the best bet.
Others may be able to contribute more precisely. It may be a case of suck it and see (as the bishop said to the actress!)  _________________ Jeff |
|
| Back to top |
|
 |
Randy Outlaw

Joined: 15 Jan 2003 Posts: 143 City: Little Rock, AR
|
Posted: Mar 09, 2004 4:45 pm Post subject: |
|
|
| If your using no weight, put 500-600 in the bow to start. If you want more, put some in the back. Generally ppl say for i/os put 60% front 40% rear. Trim the motor up 1/4 to 1/2 to clean up the wake. |
|
| Back to top |
|
 |
|
|
|