Fins

gocreighton11 · Newbie Joined: 17 Jan 2006 Posts: 2

How do I attach my rail fins to my O'brien Oasis wakeboard??...thanks for the help

whenever I try to put both screws in the wakeboard, one of them goes in but the other one doesn't seem like it matches up and just pushes that side of the fin away from the wakeboard.

DunDunDun · Posted: Jan 17, 2006 4:52 pm Post subject:

is there three holes on the bottom? i know my LF does. but only two on the top. just start the screw and then put the other one in. its really quite simple. haha

gocreighton11 · Newbie Joined: 17 Jan 2006 Posts: 2

No, what happens is that i try to get one in and the other one doesn't really match up and pushes the fin away from the wakeboard

LFADAM · Posted: Jan 17, 2006 7:02 pm Post subject:

gocreighton11, you just gotta line them up, and screw them in evenly...like half turn on one, then half on the other. If you do all on one, itll tilt the other one so it wont go in. Fin screws can be tricky, just play around with them for a little bit. Sometimes one is longer than the other, make sure you try both holes. I think on mine (substance 141) the longer screw is for the hole nearer to the tip/tail. Good luck.